1995 ram 1500 4x4 cummins conversion build

This was a 10psi launch at the local drag strip.
a364d6d818caf5fcc688486ed01de5e0.jpg


I tried launching with as much boost as the brakes would hold, it was around 16-18psi when I left and dropped the driveshaft.
a4ceecf3d8270136b06ef9f40a7f1b6c.jpg
3d318a02c255e1168213dfb9cf9ad92e.jpg
0fe854c04735133fa1ea7b5664be0246.jpg


It was a pretty good day overall. I was able to drive home 25 miles in 4wd. ?


Sent from my iPhone using Tapatalk
 
Are you running any caltracs or anything? Prob wrapped the pinion yoke up. Quick truck



I had clamps on the front of the leaf springs. I should have had some on rear too, but that's all I had at the moment. I'm sure there was wrap still and caused this.. I plan on getting caltracs before going drag racing again haha


Sent from my iPhone using Tapatalk
 
5943bbfce48ebb365f5b787041e04def.jpg


Little update. Got driveshaft fixed and new pinion yoke. Got some small modifications done and left to do. But going to make my first 1/4 mile passes next Thursday in Bradenton fl.


Sent from my iPhone using Tapatalk
 
8a4cf2cba393b1aebc3f6c00133eeea1.jpg


160 pump has never been benched or off truck. Original valve springs and stock output shaft. Still have original lift pump. On the original dana 44 1500 axles also.


Sent from my iPhone using Tapatalk
 
dd7ae294ec63b0dc5b9355be0d0802a1.jpg
80722d18a7a4d7c91bc429de3c545ab7.jpg


Well I’m dedicating this to a race truck. Gutted the interior and working on gutting the bed soon. I put newer 20” stocks and removed mirrors also.


Sent from my iPhone using Tapatalk
 
Back
Top