Creating A Single Event Tune With CSP5

EverydayDiesel

EverydayDiesel

I drink diesel
Hello,

I recently zeroed out these tables for CSP5 Program #5 but this does nothing.
1. pilot timing, base table
2. pilot timing, air density adjust 1
3. pilot timing, air density adjust 2

when i start the truck and put it on #5, there is no difference in engine sound. I was expecting when I zeroed those tables that it would stop the pilot injection and change the sound. (post is already turned off)

Can someone please tell me what I am missing?

Thanks in advance
 
Thank you for the reply. I am not sure how to do that with a CSP5 without making all tunes single event. When i look at the tables for tune #5 this is the options that I have

I zeroed out the 3 tables that started with pilot

12valve%20tune%20side%20pane.png


If i change in the 'main' then it will make all of the tunes (1-5) a single event right?
 
Unfortunately it's all or nothing with the 6.7 pilot. Just one more reason the 07.5+ ecm's suck. For the life of me I can't figure out why they didn't include the pilot fuel tables.
 
ComnRailPwr said:
Unfortunately it's all or nothing with the 6.7 pilot. Just one more reason the 07.5+ ecm's suck. For the life of me I can't figure out why they didn't include the pilot fuel tables.
Click to expand...

actually its a function of efi live v2/csp5 as they did not build it in on 07.5-09's.

10's+ have it built into csp5 custom os
 
You must log in or register to reply here.
Back
Top