Making a 1ton rearend live?

Dazed&Confused

Dazed&Confused

Surfing my own world
Anybody have any advice on how to make them live? I should be able to start on mine come spring and just trying to gather info. Are the 5500 series and 550 series trucks still classified as a 1ton? I need to start gathering parts at some point for mine so would be nice to know. What do you think Dale and Lynn? Oh and hear is a pic of the project.

Andy
 

Attachments

  • P1010957.jpg
    P1010957.jpg
    119 KB · Views: 58
I'll comment later I have to go to a Christmas party then again it might get posted tommorow.
Where have you been hiding Andy
Dale
 
try to find an 80 or a 11.5 AAM from a dodge, get a full billet steel spool and the biggest axles you can get for it. Also don't scrap on the grears. You get what you payfor.
 
10.5 14bt s 1.75/30 axle stock with pinon support
AAM1150 a 2.005/30 axle with no pinon suport.
D80 2.0/37 spline and no pinion support.

also if you can find soem eatton HO72 or HO110 i know they have pinoon and ring support
11538_101927799834119_100000506975827_52305_4592660_n.jpg

11538_101927779834121_100000506975827_52304_1177584_n.jpg

11538_101927756500790_100000506975827_52303_4891478_n.jpg




some one on pirate 4x4 was able to graft 2.5ton axle shaft inside a 10.5 carrier..
 
malibu795 said:
10.5 14bt s 1.75/30 axle stock with pinon support
AAM1150 a 2.005/30 axle with no pinon suport.
D80 2.0/37 spline and no pinion support.

also if you can find soem eatton HO72 or HO110 i know they have pinoon and ring support.
Click to expand...


What do you mean 2.0/37 and such.
 
zstroken said:
What do you mean 2.0/37 and such.
Click to expand...

diameter/spline count...


honestly dont know were i was going with that post.......:bang


IMO i would runt he 10.5 14b and upgrade axle shafts... due to the pinnion support...

and the crush sleave that is in the 14b... you can repalce it with a machined spacer
 
Mine has the 70 under it so I know its not going to live. I'm debating on the 80 or AAM. I'm going to wait a while and try to find a donor truck. Working on purchasing a house now and I just couldnt pass this truck up its to clean. Really want to run a D-Max/6 speed in it but we will see. I'd also like to still drive it on the street some but I know if I run a spool that wont be happening. Does anyone think an ARB or Detroit would hold up?

I've been busy with work and the holidays Dale. Little free time I have I've been either working on my junk or spending time with my daughter.
 
Last edited:
I don't see how your gonna get 2" axles in a d80 unless you completely redo the spindles.
 
Dazed&Confused said:
Mine has the 70 under it so I know its not going to live. I'm debating on the 80 or AAM. I'm going to wait a while and try to find a donor truck. Working on purchasing a house now and I just couldnt pass this truck up its to clean. Really want to run a D-Max/6 speed in it but we will see. I'd also like to still drive it on the street some but I know if I run a spool that wont be happening. Does anyone think an ARB or Detroit would hold up?

I've been busy with work and the holidays Dale. Little free time I have I've been either working on my junk or spending time with my daughter.
Click to expand...

i got a detroit in my 75 K20 (14bt)... out side of increased tire wear... its fine..

it does pop and bang, squell, and chrip around shrape turns... other then that is fine.

if it main is a puller go full spool and forget about it
 
From what I've seen the 11.5 AAM from a Dodge is about the strongest I've seen. I very rarely hear of one breaking except for the GM AAM's, but a fellow puller that runs a D-max was telling me he looked at his rearend and his sons Mega Cab rearend and he said he believes the axle tubes on the GM version are smaller. That would explain why the GM versions seem to break more axles because of axle tube flex. Just my $.02
 
Dazed&Confused said:
:hehe:I guess that Christmas party got the best of Dale last night.
Click to expand...

I beat the crap out of my GM AAM with no issues when I owned the truck anyway. I have seen 80's grenade a ton of times but I am still a firm believer in them because of what you can do to upgrade them.

Now....I honestly don't see why a properly built 14-bolt won't hold up. I have seen the gasser trucks running them for years and although they don't have quite the torque we have the stress is still there and I have seen them hold up where a D70 or 80 won't. The pinion bearing is what keeps them going I believe and if someone can get a spool made up for larger shafts and the finer spline count I think it would be totally bullet proof.

RyanB
 
RyanB said:
I beat the crap out of my GM AAM with no issues when I owned the truck anyway. I have seen 80's grenade a ton of times but I am still a firm believer in them because of what you can do to upgrade them.

Now....I honestly don't see why a properly built 14-bolt won't hold up. I have seen the gasser trucks running them for years and although they don't have quite the torque we have the stress is still there and I have seen them hold up where a D70 or 80 won't. The pinion bearing is what keeps them going I believe and if someone can get a spool made up for larger shafts and the finer spline count I think it would be totally bullet proof.

RyanB
Click to expand...


Thats the problem. Parts are limited for the 14bolt.
 
The green stuff...lol I have got a good set of gears in mine and a full spool. Still gotta get a good set of axels. Right now Im trying to make my mind up if im going open driveline or not. If I do my 80 will be up for sale.

Lynn
 
Persingerpulling said:
a 14bolt won't hold up, just spend the money and get an 80.
Click to expand...


thats the problem though, the Dana 80's are experianceing the exact problem right now that the 14-bolt will fix and thats keeping the pinion up against the ring gear. I believe that axle shaft diameter on the 14bolts are equal to that of the AAM's but just a courser spline count. The Ring gear is also a little smaller but I have yet to see the carnage to the gears like you do in the 80's and this is probably because of that 3rd bearing keeping everything true.


Have you considered going to a F106? you can get 8x6.5" hubs for them now and you could easily adapt a disk brake kit to one from one of the 14-bolt conversion kits. Just a thought as you can get down to a 5:29 gear ratio...might still be a bit high tough for you..Proformance Pros Online Store

RyanB
 
No classes around hear will let you run anything except OEM driveline. Hoping to see that change though before I'm ready to start working on the rear. Love to stick a F106 in it.
 
You must log in or register to reply here.
Back
Top