Fleece Performance Engineering is happy to introduce a new Data Logging System!!
The datalogger has 19 channels of analog input. The unit has all 19 channels available on 1 module with no thermocouple amp's to buy or additional modules. The harness has all 19 connections standard. It comes with 4 RTD temp sensors which are faster acting than type k pyro's, and two 0-100psi pressure sensors. There are still 7 channels of temp input available for which additional sensors can be purchased. There would be 4 additional pressure channels and two frequency inputs (turbo, shaft speeds, etc) which can also be switched over to additional pressure inputs via hardware jumper.
Also keep in mind the other channels can use any 0-5v sensors if you have something else in mind. We have a linear potentiometer sourced to measure suspension travel for sled pullers and drag racers, tweaking their setups.
We also feature a 20hz GPS chip, which is the latest offering in the industry, to monitor ground speed during sled pulling and drag racing. Something the other mfg's don't offer.
Here's a copy and paste rundown of what it costs to buy a racepack vs our logger. And at that you still have two different platforms that do not communicate. EFILive put in some effort to make this work very well with their product. You can black box log just the FPE datalogger (12v cummins, tractor, etc) or log a module with our PID's enabled. It's very powerful!
FPE DataLogger Kit $1,599.00
- 96 channels ODBII Included
- GPS Included
- Accelormeter Included
- 4 EGT Included
- 2 Pressure Included
- EGT Bungs 4/4 Included
7 EGT Bungs Stl/Alm $35.00
7 Additional EGT $483.00
4 Additional Pressure $396.00
2 Additional Speed $398.00
EFI-Live AutoCal $345.00
FPE Datalogger Max feat. $3,256.00
- All FPE Datalogger units will need some form of EFI Live to communicate.. via AutoCal or V2's
-The Datalogger will work with EFI to intergrate the EFI PID's and the Datalogger info all into one, For the guys running EFI Live
-The unit will work on any form of engine..
-Here is a youtube link to it being tested
Fleece Performance DataLogger Demo - YouTube
For more Details or to place a order contact Fleece Performance @
info@fleeceperformance.com or Call 855-839-5040
-The Unit Will start shipping out first week of March!! We are open to Pre-Orders now!
