2001 chevy"duramax" actually its got a cummins in it. - Competition Diesel.Com

duramaxcummins · 08-23-2009, 07:21 PM

I have a fully custom 2001 chevy ext cab short bed with a 12 valve cummins engine it. The frame of the truck is a 97 dodge cummins frame along with front axle, transmission, transfercase and engine ofcourse. The rear axle is a 1 ton gm axle. The truck has been hooked to sled one time and that was only with a 450 hp clutch. I have a 750hp sb clutch comming along with the updated input shaft for the nv4500, so it will have a new one of those in it. The engine from bottom to top, fully studded bottom end, mains and rods, molley std size bore pistons, kdp kit, helix 2 cam, pdp freeze plugs, electric water pump, haisley machine front billet cover, the head is stock with 60lb springs. I put the head on just to run the truck to see what my twins would do. The twins are a bd s300 with a c 9 cat turbo. The twins have no problem getting lit. The original idea was to than take the head back off, buy a new one, get it o ringed and stud the head. I have the studs, just didnt go the distance to buying a new head and o ringing it. Those will go with the truck. The p pump was a schied pump, however i do not know what has been done to it completly. I bought it used from a fella on here, from that there is .093 stainless lines to 5x.18 injectors. I would say the truck does have atleast 600hp. On the inside, this truck has leather, electric seats, has 06 tow mirrors, the gauges are custom. The gauges come from Dakota digital, along with the 100psi boost gauge. Heres things the truck will need, I havnt gotten the modual to hook up the tack for the dakota digital gauges, thats 100 bucks, doesnt have a good egt gauge, fuel level sender needs wired up, along with speedometer. everything else is hooked up, oil, alt ect. Im wanting 10,000 for the truck obo, i will also trade it for a 03 or newer std cab longbed truck. I have pictures as i was building this truck, along with pictures of how it looks now. I have 4 new tires and rims on the truck but those will not go with it. I will prob buy a set of used aluminum rims and tires to put on the truck. If someone needs pictures, give me your emails, thanks for lookin! 2604170113 is my number, truck probably hasnt even seen 1000 miles on engine yet. Its located in ohio, zip code 45874.

Cummin_Get_Some · 08-23-2009, 07:59 PM

pics to smokinduramax06@aol.com

gottacummins · 08-23-2009, 08:08 PM

pics to stu_ball_42@yahoo.com

Duramaxallison0 · 08-23-2009, 08:10 PM

pics Duramaxallison08@aim.com

12valve_221 · 08-23-2009, 08:26 PM

pics to p_jorgensen2007@hotmail.com

JBFarmsCummins · 08-23-2009, 08:27 PM

Pics to jb8410@live.com

Cummin_Get_Some · 08-23-2009, 08:39 PM

Might be easier to just post them, so everyone can enjoy them and you don't have to send out a bunch of emails.

custom8726 · 08-23-2009, 09:06 PM

Quote:

Originally Posted by Cummin_Get_Some

Might be easier to just post them, so everyone can enjoy them and you don't have to send out a bunch of emails.

X2, curious aswell......

Got Twins??? · 08-23-2009, 09:20 PM

Quote:

Originally Posted by custom8726

X2, curious aswell......

X3^

duramaxcummins · 08-23-2009, 09:39 PM

Quote:

Originally Posted by Got Twins???

X3^

agreed, i couldnt figure out how to make them the 800x600 they require on here but i just got a buddies help and they will be up on here shortly

Got Twins??? · 08-23-2009, 09:46 PM

Quote:

Originally Posted by duramaxcummins

agreed, i couldnt figure out how to make them the 800x600 they require on here but i just got a buddies help and they will be up on here shortly

Nice!!! Thanks!

duramaxcummins · 08-23-2009, 09:50 PM

heres some, i will get more up here later. i have to clean the inside of the truck out and i will take some of it. This truck is REAL clean as far as no rust dents ect. the tail gate inside and bed inside has seen its better days but it was used as a farm truck until recent. No rips or tears in any seats or anything. All the turbo pipes are on now and no the battery terminals are not still vise griped

if you guys want to see specifics please let me know as i will probably be taking pics this comming weekend or earlier this week if i have time from work.

Cummin_Get_Some · 08-24-2009, 04:55 AM

Is that the sunburst orange color they had in 01? Does it have a hood that fits on it?

fox · 08-24-2009, 05:08 AM

You certainly improved that Chevy!!!
No hanging frame under it.
A good front axle.
The best motor!!!!

zstroken · 08-24-2009, 06:52 AM

If only it was a crew cab

duramaxcummins · 08-24-2009, 07:26 AM

Quote:

Originally Posted by Cummin_Get_Some

Is that the sunburst orange color they had in 01? Does it have a hood that fits on it?

yes sir it is! original paint, not aftermarket! I do have the hood, its on it now actually, the intake tubes were lowered and rubber boots taken out.

duramaxcummins · 08-24-2009, 07:30 AM

i forgot to mention, the gear ratios are 3:73's not the 354 dodge gear. and the front end is welded but the lock colar for the 4 wheel drive is hooked to a manual cable to engage and disengage the front axle

duramaxcummins · 08-24-2009, 01:00 PM

if someone wants this thing, make me a reasonable offer on it and we'll do some talkin!

Cummin_Get_Some · 08-24-2009, 01:27 PM

Ive got a couple people intereseted in this truck. Trying to talk him into coming out and checking it out... your in the west end of Ohio, right?

Pm me any other details and the best price you can do on it! Hes been looking for a toy, and this bad boy would be perfect IMHO!!!!

nomercy · 08-24-2009, 01:33 PM

Quote:

Originally Posted by fox

You certainly improved that Chevy!!!
No hanging frame under it.
A good front axle.
The best motor!!!!

x2 on that

08-23-2009, 07:21 PM	#1
duramaxcummins Name: duramaxcummins Title: Chevy Cummins Status: Not Here Join Date: May 2008 Location: Ohio City, OH Member`s Gallery Posts: 93	2001 chevy"duramax" actually its got a cummins in it. I have a fully custom 2001 chevy ext cab short bed with a 12 valve cummins engine it. The frame of the truck is a 97 dodge cummins frame along with front axle, transmission, transfercase and engine ofcourse. The rear axle is a 1 ton gm axle. The truck has been hooked to sled one time and that was only with a 450 hp clutch. I have a 750hp sb clutch comming along with the updated input shaft for the nv4500, so it will have a new one of those in it. The engine from bottom to top, fully studded bottom end, mains and rods, molley std size bore pistons, kdp kit, helix 2 cam, pdp freeze plugs, electric water pump, haisley machine front billet cover, the head is stock with 60lb springs. I put the head on just to run the truck to see what my twins would do. The twins are a bd s300 with a c 9 cat turbo. The twins have no problem getting lit. The original idea was to than take the head back off, buy a new one, get it o ringed and stud the head. I have the studs, just didnt go the distance to buying a new head and o ringing it. Those will go with the truck. The p pump was a schied pump, however i do not know what has been done to it completly. I bought it used from a fella on here, from that there is .093 stainless lines to 5x.18 injectors. I would say the truck does have atleast 600hp. On the inside, this truck has leather, electric seats, has 06 tow mirrors, the gauges are custom. The gauges come from Dakota digital, along with the 100psi boost gauge. Heres things the truck will need, I havnt gotten the modual to hook up the tack for the dakota digital gauges, thats 100 bucks, doesnt have a good egt gauge, fuel level sender needs wired up, along with speedometer. everything else is hooked up, oil, alt ect. Im wanting 10,000 for the truck obo, i will also trade it for a 03 or newer std cab longbed truck. I have pictures as i was building this truck, along with pictures of how it looks now. I have 4 new tires and rims on the truck but those will not go with it. I will prob buy a set of used aluminum rims and tires to put on the truck. If someone needs pictures, give me your emails, thanks for lookin! 2604170113 is my number, truck probably hasnt even seen 1000 miles on engine yet. Its located in ohio, zip code 45874.

08-23-2009, 07:59 PM	#2
Cummin_Get_Some Name: Cummin_Get_Some Title: diesel fanatic Status: Not Here Join Date: Jan 2008 Location: Arthurdale, WV Member`s Gallery Posts: 1,082	pics to smokinduramax06@aol.com __________________ 08 GMC 2500 DURAMAX DPF & EGR DELETED EFI TUNED BY BLACKOUT PERFORMANCE

08-23-2009, 08:27 PM	#6
JBFarmsCummins Name: JBFarmsCummins Title: Georgia Diesel Mafia Status: Not Here Join Date: May 2008 Member`s Gallery Posts: 137	Pics to jb8410@live.com __________________ 1998 Dodge ECLB 4x4 12 valve. Darren Morrison built tranny and some twins on the way. 1997 Dodge 3500 4x4. Worktruck

08-23-2009, 08:39 PM	#7
Cummin_Get_Some Name: Cummin_Get_Some Title: diesel fanatic Status: Not Here Join Date: Jan 2008 Location: Arthurdale, WV Member`s Gallery Posts: 1,082	Might be easier to just post them, so everyone can enjoy them and you don't have to send out a bunch of emails. __________________ 08 GMC 2500 DURAMAX DPF & EGR DELETED EFI TUNED BY BLACKOUT PERFORMANCE

08-24-2009, 04:55 AM	#13
Cummin_Get_Some Name: Cummin_Get_Some Title: diesel fanatic Status: Not Here Join Date: Jan 2008 Location: Arthurdale, WV Member`s Gallery Posts: 1,082	Is that the sunburst orange color they had in 01? Does it have a hood that fits on it? __________________ 08 GMC 2500 DURAMAX DPF & EGR DELETED EFI TUNED BY BLACKOUT PERFORMANCE

08-23-2009, 08:08 PM	#3
gottacummins Name: gottacummins Title: Diesel Enthusiast Status: Not Here Join Date: Aug 2008 Member`s Gallery Posts: 147	pics to stu_ball_42@yahoo.com

08-23-2009, 08:10 PM	#4
Duramaxallison0 Name: Duramaxallison0 Title: Too Much Time Status: Not Here Join Date: Oct 2008 Member`s Gallery Posts: 272	pics Duramaxallison08@aim.com

08-23-2009, 08:26 PM	#5
12valve_221 Name: 12valve_221 Title: Rookie Status: Not Here Join Date: Jan 2009 Member`s Gallery Posts: 9	pics to p_jorgensen2007@hotmail.com

08-24-2009, 05:08 AM	#14
fox Name: fox Title: Too Much Time Status: Not Here Join Date: Dec 2008 Location: central Illinois Member`s Gallery Posts: 908	You certainly improved that Chevy!!! No hanging frame under it. A good front axle. The best motor!!!! __________________ 1998 12 valve 4x4 2500 auto trans.

08-24-2009, 06:52 AM	#15
zstroken Name: zstroken Title: For $$$ your name here Status: Not Here Join Date: Sep 2006 Location: Western Michigan(by the lake) Member`s Gallery Posts: 23,151	If only it was a crew cab __________________ 2008 4x4 Megacab, 68RFE 97 Dodge gone.... 24V P-Pump Mafia member #1(retired) Thanks to Mumau Diesel, Goerend Transmission, Northeast Diesel Service!

08-24-2009, 07:30 AM	#17
duramaxcummins Name: duramaxcummins Title: Chevy Cummins Status: Not Here Join Date: May 2008 Location: Ohio City, OH Member`s Gallery Posts: 93	i forgot to mention, the gear ratios are 3:73's not the 354 dodge gear. and the front end is welded but the lock colar for the 4 wheel drive is hooked to a manual cable to engage and disengage the front axle

08-24-2009, 01:00 PM	#18
duramaxcummins Name: duramaxcummins Title: Chevy Cummins Status: Not Here Join Date: May 2008 Location: Ohio City, OH Member`s Gallery Posts: 93	if someone wants this thing, make me a reasonable offer on it and we'll do some talkin!

08-24-2009, 01:27 PM	#19
Cummin_Get_Some Name: Cummin_Get_Some Title: diesel fanatic Status: Not Here Join Date: Jan 2008 Location: Arthurdale, WV Member`s Gallery Posts: 1,082	Ive got a couple people intereseted in this truck. Trying to talk him into coming out and checking it out... your in the west end of Ohio, right? Pm me any other details and the best price you can do on it! Hes been looking for a toy, and this bad boy would be perfect IMHO!!!! __________________ 08 GMC 2500 DURAMAX DPF & EGR DELETED EFI TUNED BY BLACKOUT PERFORMANCE