Cat 3116 & Navistar 359.9 in scrap yard

Mark Nixon

Mark Nixon

No Savior among the flesh
Local scrapper has a Cat 3116 and a Navistar 359.9 (DT360?) that were in busses.
Both are ~1995 vintage.

I'm pulling turbos, possibly pumps and injectors.

Anything else worth saving?
Heads? Cranks? Externals?

I can get them complete, but the blocks have holes cut in them.

Mark.
 
Pics attached.

Mark.
 

Attachments

  • 1521484802534-1837022940.jpg
    1521484802534-1837022940.jpg
    622.2 KB · Views: 0
  • 1521484864535-1651151389.jpg
    1521484864535-1651151389.jpg
    405.8 KB · Views: 0
  • 1521484907451-1780499551.jpg
    1521484907451-1780499551.jpg
    548 KB · Views: 0
  • 1521484924276-1334049804.jpg
    1521484924276-1334049804.jpg
    618.3 KB · Views: 0
  • 1521484961262-190930853.jpg
    1521484961262-190930853.jpg
    303.5 KB · Views: 0
  • 15214850404581143611993.jpg
    15214850404581143611993.jpg
    525.6 KB · Views: 0
  • 15214850744891825713316.jpg
    15214850744891825713316.jpg
    343.4 KB · Views: 0
  • 15214850913361225553081.jpg
    15214850913361225553081.jpg
    380.7 KB · Views: 0
Wondered that also, local junkyard to me had about 10 ups trucks with 12 valves in them that had the blocks torched just like those.
 
In order to replace with a new non-EPA engine the EPA needs proof of destruction also. We have to do this with all engines being replaced on older equipment
 
I agree, it's a waste.
I can't imagine how fit to be tied I would be to see 5.9 or 6.7 Cummins in this scenario.

A few years back, I recall being faced with a rumor that John Deere(?) had a bounty on certain mechanical engines, because a guy tried to buy some 12 valves from me to meet some goals for it.
Of course, he left my place empty handed. ;)

Mark.
 
Have a yard close to me, with a bus that was running, drove into the yard and then a hole was torched. 24v vp44 engine but 45,000 miles non 53 block.
 
I bought the engines mentioned above, due to having some core value and parts.

Just picked up a 190hp Cat 3126 today, same destruction, has ECM, all externals and a beat to crap Allison behind it.

Need anything, holler, they're going to get cored and scrapped for cast iron through the summer.

Mark.
 
I have 3.
1 from the 95 Cat 3116.
1 from the 99 Cat 3126.
1 from a 2008 6.7 QSB, which is an A2000.

Mark.
 
You must log in or register to reply here.
Back
Top