Cleaning out my intercooler

Unfortunately some of my air filter went threw my turbo. It was a hard rubber piece and just buggered up the comp wheel and housing. It has been rebuilt, It was a 35/40, 60mm 6 blade, now its a 60mm 7 blade.

What it the best way to clean out the intercooler?

I have used a gas backpack leaf blower to blow it out backwards but only got out some of the rubber pieces. The wheel shards are still MIA.

Thx, Sean

If it was me, I would replace the intercooler for piece of mind. Just my .02

Agreed, they are pretty cheap compared to potentially putting some metal into your motor.

Yeah, that's what i thought. I was hopping it would be easier but when not so much came out with the reverse blow...

Found some on ebay for under $300, not too bad. Does the bumper need to come off to replace?

Yes the bumper needs to come off, check these out http://www.turboneticsinc.com/performance/sites/default/files/2-479_5.9_Dodge.pdf

Thanks, The bumper and more...

Yup, might as well put in a cam while I'm in there!
The good news is I can retrieve my extension magnet that I put in between the intercooler and radiator so many years ago!

S