The Grinch (Scheid Diesel) Pro Street Truck

[Cummins12Club]

FOR SALE: (The Grinch)
We have decided to sell our 1997 Dodge Ram pro street truck formerly known as The Grinch. This truck had set the standard for 4wd diesel racing for years and ran out front for most of its life. It was the 1st truck to the 9s and to the 8s. Chassis has been 5.41 and 145mph in the 1/8th with previous power plant. At this time the truck is turn key with a fresh power plant and that's how we would like to sell it. Turn key. Listed below is the basic info of truck and driveline. I will go into depth more on engine specs with serious buyers.

Body:
-Custom 1 piece fiberglass bed
-Custom 1 piece fiberglass front clip w/ lift off hood
-Custom Paint
-Preformed scratch resistant front lexan windshield
-Scratch resistant pre cut rear lexan window
-Crank up glass doors and glass side windows
-Sunroof (nice at a hot track)
-Kirkey aluminum racing seat with padding
-PPP kwik shift 1 shifter set up for air (needs bottle and lines)

Chassis:
-Chromoly 8.50 cert cage w/ window net
-Full Chromoly 3/4 rear halve (firewall back in tube) built by FAST chassis
-Fabricated 9" rear axle with aluminum 3rd member, 40 spline gun drilled axles (hold them with 1 finger), dual strange rear calipers and strange front rotors
-Front strange single calipers and rotors
-ARB air locker up front in the solid (later style) Dana 60. Functions as a posi w/o air (as used currently)
-Wheels are custom offset 5x5 pattern 3/4" centers Holeshot holestars 16x10 up front, 16x14 in the rear on M&H 30/14 slicks.
-Dual parachute kit
-Air Throttle valve on throttle cable
-AFCO shocks on all 4 corners and front and rear anti roll bars
-Engine catch can (aluminum)
-Scheid electric water kit used as electric power steering and brakes (very nice for loading/unloading and moving around not under power)
-Quick ratio gear box
-Newer Hydroboost w/ pressure gauge
Truck stops extremely well. Chutes have never been used.

Transmission:
47re built by Competition Transmission
Billet Phat Input/pump stator
DPC 4 disc slut stall converter (brand new 0 cuts)
-Billet SFI flex plate
-All billet upgrade internals
-Billet Phat shaft 29 spline output
-Competition Transmission full manual VB, lock up in any gear.
-Transmission internals are set up for a trans brake valve body if desired current VB does not have trans brake)
Full details of transmission will be shared with serious buyers
-water cooled trans cooler
-NP241HD t case (full functioning w all ranges)
-new year drive shaft
-front driveshaft and yoke are newer and upgraded

Engine:
All engine parts and machine work were done by Scheid Diesel Services
-5.9 filled IH block (standard bore)
-Wiseco forged coated Pistons w/ custom bowl machining done by scheid.
-R&R billet rods
-14mm main studs
-King Race bearings (coated)
-fluidampr
-all 7 cam bearings
-Scheid spec billet cam
-billet tappets
-scheid stage 3 push rods
-scheid valve springs (titanium keepers and retainers)
-Hamilton large valves
-hand ported and polished head (50+ hours labor)
-scheid aluminum intake runner
-14mm head studs
-fire ring block
-copper head gasket
-14mm p8600 scheid pump
-IH 5x.030 scheid Lightning injectors
-.120 stainless lines
-DSR mechanical driven fuel pump
-Precision Turbo pro mod 88
-Custom stainless header
-destroked oil filter relocation kit
-all billet covers (inc 1 piece valve cover)
-A/W intercooler w all V band piping (solid engine and trans)

Truck has only made 1 full pass on the new power plant. Transmission and converter has 0 passes on them. (Just installed) everything is extremely fresh and completely 100% turn key race track ready. I'm sure I am forgetting somethings. Please only serious enquiries only. PM for pricing. I may consider selling as a roller for the right deal but prefer turn key sale and will NOT part anything out. You can PM me or text/call me directly (859-466-7737) with serious interest. We hate to see this piece of history go but it deserves someone who has the ability to keep it in the pro street chase. Thanks for reading IMG_9055.jpg

IMG_9814.jpg

IMG_8432.jpg

[Cummins12Club]

Forgot to put the price on here. $65K turn key or $30k minus engine, trans and intercooler.

[Subman631]

Have you been able to keep the tranny/torque converter to live more than a couple of passes? Seth used a hand clutch why did you remove that?

[Cummins12Club]

Originally Posted by Subman631

Have you been able to keep the tranny/torque converter to live more than a couple of passes? Seth used a hand clutch why did you remove that?

We purchased the truck as a roller. Repowered it with my engine. We did not like the slow 60' and maintenance of the clutch nor was it offered to us in the sale. This enginge makes 500hp less (atleast) then Seth's did so we were not worried about hurting converters from power.

[Cummins12Club]

Bump. We've decided to sell as a roller. T case and drive shafts will stay w the truck no matter what. PPP air shifter, autometer gauges, seat and electric/hydraulic steering set up can be taken off. $28k w those items gone or $30k complete roller w Kinetik 1800 pro battery only 1 year old

[Cummins12Club]

Bump. final price of $27,500 with all the bells and whistles. Basically everything you need to just drop your engine and transmission/intercooler set up in and go. will deliver anywhere within an hour from Cincinnati OH

[Cummins12Club]

Will sell roller for $26k and i keep the gauges and shifter. This would be an excellent chassis for 6.70 index. Throw your 750hp engine, transmission and intercooler set up in and go racing!

[Cummins12Club]

Bump. Still for sale as roller or turn key. $62k turn key or $26k roller

[Cummins12Club]

Bump, someone needs to be racing this next year!

[Bodacious]

That is such a bad A$$ truck. GLWS

[Cummins12Club]

Truck is still for sale, turn key or roller.

[HOLDERDOWN]

I've always loved that truck

[WUnderwood]

Originally Posted by HOLDERDOWN

I've always loved that truck

What he said.

[97rada]

I Just wish someone would use it for what it should be used for. I was hoping Seth wanted it back lol

[Cummins12Club]

Originally Posted by 97rada

I Just wish someone would use it for what it should be used for. I was hoping Seth wanted it back lol

We offered it back to Seth as a roller, he really had no interest in racing anymore. I would love some one to buy it and enjoy it the way it should be enjoyed.

[Subman631]

Originally Posted by Cummins12Club

We offered it back to Seth as a roller, he really had no interest in racing anymore. I would love some one to buy it and enjoy it the way it should be enjoyed.

There is a bunch of the top trucks from past years who have the same feelings.

[Cummins12Club]

If it doesn't sell before the race season we are going to start running ODSS events with it. It will still stay forsale but I'm not going to just let it sit.

[Cummins12Club]

Bump. Still willing to sell complete or as roller. Any combination you want, rolling w transmission, with out, sell engine separate. Wont part truck out but will sell how ever you want it.

[SmokeShow]

After how excited you all were when your ol lady bought it, I don't really understand why you're selling it?


And WTH does "wish someone would use it like it should be used" mean? Its out on the track racing again isn't it? Why isn't that good enough? Its claim to fame was crazy HP = running folks down on the back half, wasn't it? With things moving to the 1/8th mile, what's wrong if it can't do that back half quite like it used to? To me, as long as someone's enjoying racing with it, shouldn't that be all anyone would want from it? Or nah, "impressive back halfs are life"?

[Cummins12Club]

Originally Posted by SmokeShow

After how excited you all were when your ol lady bought it, I don't really understand why you're selling it?


And WTH does "wish someone would use it like it should be used" mean? Its out on the track racing again isn't it? Why isn't that good enough? Its claim to fame was crazy HP = running folks down on the back half, wasn't it? With things moving to the 1/8th mile, what's wrong if it can't do that back half quite like it used to? To me, as long as someone's enjoying racing with it, shouldn't that be all anyone would want from it? Or nah, "impressive back halfs are life"?

Financial reasons. We cant afford to own and operate two higher caliber trucks. It doesn't make much sense for it to just sit in the garage. Someone needs to enjoy it.