|
Fresh rebuild 47re, weak reverse, no engine braking
I just rebuilt my 47rh. I went with a PDD DIY kit. I now also have a 47re fmvb from PDD as well. There was two ports on the case that I had to epoxy shut for the RE valvebody to work in the RH. Everything worked perfect on jack stands, but on the ground it only moves like a foot in reverse. The forward gears work great but it does have a flare on the 2-3 shift when your deep in it. Also, there is NO engine braking at all. When the throttle is lifted it drops to like 1k rpm. I'm guessing I need to pull the trans again??
__________________
99' dodge 12v swap, 188/220, 5x16s, scheid 12mm pump, 165lb beehives, silver62/475, fuel lab, 47rh swap
03' jetta tdi, gtb2260vk, race 520s, 3" exhaust, 6" tip, Malone tune, 5 speed
94' dodge ppump 24v, 13mm, 6x18s, 200/220, 475/595, aero 1000, PCS, 4r100 swap, 2wd
|
