Probably should just make one. Unless it’s possible to cut the stock one, figure out how much shorter it needs to be, buy a piece of tube for a sleeve that has a large enough I.D the trackbar ends will slide Into it, and then weld it back together.
__________________
06 Dodge Ram 2500 6.4L, Wagler +.080 rods, Hobbit tuned, Exergy150% injectors,Polished s475/87 1:0 A/R Engineered Turbo Billet Wheel,arp625s,14mm main studs,PPE dual fuelers,Hamilton 188/220,extreme pushrods,Fleece bypass/drains/distribution block,110#springs.
|