10* retainers and keepers
Is there a source for 10 degree locks and retainers for the factory/+60lb valve springs that are steel and not titanium? I’m not going to be spinning big RPM and will just be running a 178/208 Hamilton cam on a farm truck/tow rig. If I have to get Zach’s single spring setup or a different single spring to get the better retainers and keepers I will, but if I can get a better Steel retainer and keeper setup for the 60lb springs I already have I’d be tempted to go that route if my spring pressure will be adequate. Thanks y’all
__________________
'96 2500 4x4 5sp. 3” Full Long arm lift w/35's
ValAir DD Clutch w/ Input
DFI 5x.012’s, O-ringed, 625’s
Hamilton 178/208, pushrods, PDD street springs, S362sxe/.7WG
‘12 LML crew cab swb 4x4 RC 3.5” lift with 33’s
Anarchy tune
5” exhaust w/ Jones 5050XL
|