Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > Tech Area- Dodge > Dodge Tech > 2013+ 6.7L 385
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Closed Thread
 
Thread Tools
Old 09-17-2017, 12:00 AM   #1
WILD_PHIL
 
WILD_PHIL's Avatar

Name: WILD_PHIL
Title: Too Much Time
Status: Not Here
Join Date: Nov 2009
Location: Texas
Member`s Gallery
Posts: 560
4th gen 2wd mega cab on 20s

I've been thinking about upgrading my wheels and tires. I found the style of wheels I'm going with but I'm not sure what widths to go with. Not sure if I should go 20x9 all the way around, or 20x9 on the front and 20x10 or 20x12. Give it a staggered look.

Wondering if any one else has done this or can find some pics. I've had trouble finding any on google.
The truck is a 2016 mega cab 2500 2wd g56.


Sent from my iPhone using Tapatalk Pro
__________________
Gather 2016 6.7 info before my purhase.
 
Old 09-24-2017, 11:10 PM   #2
Cacciatore
 
Cacciatore's Avatar

Name: Cacciatore
Title: Green Behind the Ears
Status: Not Here
Join Date: May 2017
Location: Long Island, NY
Member`s Gallery
Posts: 49
I was considering a larger tire for the rear, but lacking the ability to rotate was a pretty big downer.

Are you trying to go with 35s or a smaller tire? For 35s I wouldn't go wider than 9 unless you want to trim a bunch.
__________________
'11 2500 CCSB |5 blade 72mm|S&S 12mm|S&S 150%|WPD 48RE|Freedom Racing Engines
'13 3500 MCSB |Carli Commuter|Basically Stock|
 
Old 09-29-2017, 02:04 AM   #3
WILD_PHIL
 
WILD_PHIL's Avatar

Name: WILD_PHIL
Title: Too Much Time
Status: Not Here
Join Date: Nov 2009
Location: Texas
Member`s Gallery
Posts: 560
I want to run the same height tires, I just considered staggering them. I doubt I'm going to do that. I'm running 20x12s with 33x1250s on my wife's CCSB 4x4 and it's hard as hell to keep clean. I'll probably just put 20x9sor 20x10s all the way around.


Sent from my iPhone using Tapatalk Pro
__________________
Gather 2016 6.7 info before my purhase.
 
Old 10-03-2017, 06:06 PM   #4
Cacciatore
 
Cacciatore's Avatar

Name: Cacciatore
Title: Green Behind the Ears
Status: Not Here
Join Date: May 2017
Location: Long Island, NY
Member`s Gallery
Posts: 49
I ran 305/55R20 on 8.5" for a while and they were a bit too tucked. Bumped it to a 9 wide, 0mm offset on a 35" and they look much better now.
__________________
'11 2500 CCSB |5 blade 72mm|S&S 12mm|S&S 150%|WPD 48RE|Freedom Racing Engines
'13 3500 MCSB |Carli Commuter|Basically Stock|
 
Old 10-03-2017, 08:32 PM   #5
WILD_PHIL
 
WILD_PHIL's Avatar

Name: WILD_PHIL
Title: Too Much Time
Status: Not Here
Join Date: Nov 2009
Location: Texas
Member`s Gallery
Posts: 560
The 20x9s I'm looking at are +12 with a 5.5 off spec. Should kick out around 1.5" I think. Most likely barely noticeable.


Sent from my iPhone using Tapatalk Pro
__________________
Gather 2016 6.7 info before my purhase.
 
Old 12-20-2017, 09:26 AM   #6
5.9
 
5.9's Avatar

Name: 5.9
Title: I JUST WANT TO GO FAST
Status: Not Here
Join Date: Jun 2017
Member`s Gallery
Posts: 36
If you don't go any bigger then a 33" you should be ok on clearance as long as it is not leveled then you will need to get some control arms to push it forward a hair. But I have 10 wide and it makes my tires look a lot wider then my brothers and he has 9" wide. We both run the 305/55R20 Nitto Terra G2.
__________________
2005 CTD 2500, 62/65 over 75/96 compounds, 100% Exergy, 425 ARP, 3250 SBDD, pushrods, valve springs, FASS 150 w/sump, 5" magnaflow, 24" FTE resonator, 85% over dragon fire CP3, Smarty UDC Pro RT.
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:03 PM.

 


Powered by vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2018, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com