Here's some info and possible caveats about my bov system.
1- its not going to give a huge ricer-like kkkkwhhhooosh, sorry. More of a quick shht when its setup right.
2- Expect some low load / low boost venting, unavoidable when you have a no drive psi / more boost than the spring can handle situation. Doesn't hurt the turbo, its normal on gas turbo motors. IF it happens at moderate loads the regulator is too high and/or not enough spring.
We will be attempting to improve on some of the low load venting, tuned in right its not a big deal but I think I have an idea to make it better.
1- its not going to give a huge ricer-like kkkkwhhhooosh, sorry. More of a quick shht when its setup right.
2- Expect some low load / low boost venting, unavoidable when you have a no drive psi / more boost than the spring can handle situation. Doesn't hurt the turbo, its normal on gas turbo motors. IF it happens at moderate loads the regulator is too high and/or not enough spring.
We will be attempting to improve on some of the low load venting, tuned in right its not a big deal but I think I have an idea to make it better.