Race Truck project parts...Lenco CS1, 47RH, ETC, ETC - Competition Diesel.Com

Signature600 · 08-22-2017, 06:45 PM

The time has finally come...I'm selling my 1/2 ton project. Haven't been able to find time to work on it, and the diesel scene isn't my priority anymore...I've met some great folks and I'm not going anywhere, but it's time to be real, I'm never going to finish it...

So, here's some good stuff that need to find it's way into someone's hands that will make it really roll!

Lenco CS1 4 speed with reverser. Been a long time since I bought it, but I believe it's a 2.55 1st gear. All manual shift. Have a bunch of extra parts with it, frictions and rebuild parts, I think an input shaft or two, and an extra gearset in the box. I can lay it all out and give you a run down of what is there if you're interested. Can come with a centrifugal clutch for a BB chevy and some weights and tuning parts if interested.
$4000 shipped for the whole thing...shipping included to wherever!

47RH 2wd that came from Gary Ray's infamous flying 1/2 ton....Build by the late Joe Webb of Suncoast. Gary could never remember exactly what was in it, but he remember Joe telling him 1000RWHP should be possible with it. Since I don't know exactly what it has in it, I'll sell it reasonable. Laminated flexplate and triple disc suncoast converter go along with it. It did have a crack in the tail housing, that I had repaired...I have another tail housing to go with it when I find the darn thing... $1800 Shipped....

12v head, mild port, basically stock from what I can tell. $100

12v ATS t4 manifold...was originally a big foot, now has t4 flange welded to it with a wastegate flange. $125

I'll have more, but I have to figure out where all to place it for sale here. I have a CDS 13mm pump, the 97 Ram 1500 truck that's been caged and back halfed, 4 linked, with a narrowed AAM 11.5 in it, some large Real Wheels and slicks, etc, etc. Have some very large hair dryers laying around for it too... If someone wants a package deal, hit me up...It need to go make smoke somewhere.

Thanks for looking,
Chris

56cummins · 08-22-2017, 07:18 PM

Do you happen to know the stall on the converter, or any markings on it?

Signature600 · 08-22-2017, 07:59 PM

I can take a look... I remember Gary saying it was plenty to spool and old school 66/80 combo. I'll look at it in the morning and see if I can find any marks.

Forgot to post contact info... Call, text, email or pm...
Chris@mayerfarmequipment.com
740-505-0240

Thank you
Chris

Highwayman · 08-22-2017, 10:21 PM

Pics arent working on phone or computer for me, just a heads up.
Hopefully this helps you buy a rare tractor or two.

jupton · 08-22-2017, 10:44 PM

What are the very large chargers?

*Bodacious* · 08-23-2017, 04:58 AM

Quote:

Originally Posted by Highwayman

Pics arent working on phone or computer for me, just a heads up.
Hopefully this helps you buy a rare tractor or two.

Same here.

Signature600 · 08-23-2017, 07:18 AM

I think those work now...Sorry about that.

Chris

Signature600 · 08-23-2017, 07:22 AM

Quote:

Originally Posted by Highwayman

Pics arent working on phone or computer for me, just a heads up.
Hopefully this helps you buy a rare tractor or two.

I wish we were converting this to tractors...some other things have come up that take priority over toys.

I appreciate it though.

Quote:

Originally Posted by jupton

What are the very large chargers?

HE551W Holset and HX82 Holset

Chris

Signature600 · 08-23-2017, 07:58 AM

Quote:

Originally Posted by 56cummins

Do you happen to know the stall on the converter, or any markings on it?

Marked Suncoast 2404

Chris

12vchevydually · 08-23-2017, 08:34 AM

This breaks my heart!! Out of anyone in the diesel community with projects I wanted to see you get this done!!! I do know better then anyone life can get in the way of toys! If you need anything let me know!!

97rada · 08-23-2017, 08:40 AM

Any pictures of the chassis? I am here In Columbus.

Signature600 · 08-23-2017, 09:09 AM

Quote:

Originally Posted by 12vchevydually

This breaks my heart!! Out of anyone in the diesel community with projects I wanted to see you get this done!!! I do know better then anyone life can get in the way of toys! If you need anything let me know!!

Thanks bud. I just know I won't be able to do it like I want, so it's time for someone else to take the torch. I want to see it live.

Quote:

Originally Posted by 97rada

Any pictures of the chassis? I am here In Columbus.

I'll take some and get you a run down of what it is.
Chris

56cummins · 08-23-2017, 11:23 AM

I called Suncoast, guy on the phone doesn't know that number. Thanks for checking.

joefarmer · 08-23-2017, 11:28 AM

Quote:

Originally Posted by Signature600

Thanks bud. I just know I won't be able to do it like I want, so it's time for someone else to take the torch. I want to see it live.

I'll take some and get you a run down of what it is.
Chris

I still have some extra parts for it too in the garage.

Signature600 · 08-23-2017, 11:28 AM

I thought I got them all?

I'll get a hold of you!
Chris

joefarmer · 08-23-2017, 11:36 AM

Fiberglass fenders, a box of belts, tubing, bed skins, wheels, slicks, etc.

Signature600 · 08-23-2017, 11:56 AM

Quote:

Originally Posted by joefarmer

Fiberglass fenders, a box of belts, tubing, bed skins, wheels, slicks, etc.

A whole mountain of stuff, huh.

Same phone number as always? I'll bring you a present and come get that stuff out of your way.
Chris

Signature600 · 08-23-2017, 12:40 PM

Does this work?
Chris

slownoma · 08-23-2017, 02:19 PM

Pm sent.

WUnderwood · 08-23-2017, 02:55 PM

I can see it, Chris

08-22-2017, 06:45 PM	#1
Signature600 Name: Signature600 Title: THA MAN! Status: Not Here Join Date: Aug 2006 Location: Jeffersonville, Ohio Member`s Gallery Posts: 11,974	Race Truck project parts...Lenco CS1, 47RH, ETC, ETC The time has finally come...I'm selling my 1/2 ton project. Haven't been able to find time to work on it, and the diesel scene isn't my priority anymore...I've met some great folks and I'm not going anywhere, but it's time to be real, I'm never going to finish it... So, here's some good stuff that need to find it's way into someone's hands that will make it really roll! Lenco CS1 4 speed with reverser. Been a long time since I bought it, but I believe it's a 2.55 1st gear. All manual shift. Have a bunch of extra parts with it, frictions and rebuild parts, I think an input shaft or two, and an extra gearset in the box. I can lay it all out and give you a run down of what is there if you're interested. Can come with a centrifugal clutch for a BB chevy and some weights and tuning parts if interested. $4000 shipped for the whole thing...shipping included to wherever! 47RH 2wd that came from Gary Ray's infamous flying 1/2 ton....Build by the late Joe Webb of Suncoast. Gary could never remember exactly what was in it, but he remember Joe telling him 1000RWHP should be possible with it. Since I don't know exactly what it has in it, I'll sell it reasonable. Laminated flexplate and triple disc suncoast converter go along with it. It did have a crack in the tail housing, that I had repaired...I have another tail housing to go with it when I find the darn thing... $1800 Shipped.... 12v head, mild port, basically stock from what I can tell. $100 12v ATS t4 manifold...was originally a big foot, now has t4 flange welded to it with a wastegate flange. $125 I'll have more, but I have to figure out where all to place it for sale here. I have a CDS 13mm pump, the 97 Ram 1500 truck that's been caged and back halfed, 4 linked, with a narrowed AAM 11.5 in it, some large Real Wheels and slicks, etc, etc. Have some very large hair dryers laying around for it too... If someone wants a package deal, hit me up...It need to go make smoke somewhere. Thanks for looking, Chris __________________ THANKS TO: Tim Barber @ TRE Diesel Jeff Mumau @ Mumau Diesel Service Rip @ Source Automotive Don Thuren @ ThurenFab Suspension Columbus Diesel Supply

08-22-2017, 07:18 PM	#2
56cummins Name: 56cummins Title: Too Much Time Status: Not Here Join Date: Mar 2014 Member`s Gallery Posts: 736	Do you happen to know the stall on the converter, or any markings on it? __________________ 95 cummins

08-22-2017, 07:59 PM	#3
Signature600 Name: Signature600 Title: THA MAN! Status: Not Here Join Date: Aug 2006 Location: Jeffersonville, Ohio Member`s Gallery Posts: 11,974	I can take a look... I remember Gary saying it was plenty to spool and old school 66/80 combo. I'll look at it in the morning and see if I can find any marks. Forgot to post contact info... Call, text, email or pm... Chris@mayerfarmequipment.com 740-505-0240 Thank you Chris __________________ THANKS TO: Tim Barber @ TRE Diesel Jeff Mumau @ Mumau Diesel Service Rip @ Source Automotive Don Thuren @ ThurenFab Suspension Columbus Diesel Supply

08-22-2017, 10:44 PM	#5
jupton Name: jupton Title: Horsepower lover Status: Not Here Join Date: Aug 2009 Member`s Gallery Posts: 245	What are the very large chargers? __________________ 1995 dodge 2500 4x4 6spd Pro Street puller

08-23-2017, 07:18 AM	#7
Signature600 Name: Signature600 Title: THA MAN! Status: Not Here Join Date: Aug 2006 Location: Jeffersonville, Ohio Member`s Gallery Posts: 11,974	I think those work now...Sorry about that. Chris __________________ THANKS TO: Tim Barber @ TRE Diesel Jeff Mumau @ Mumau Diesel Service Rip @ Source Automotive Don Thuren @ ThurenFab Suspension Columbus Diesel Supply Last edited by Signature600; 08-23-2017 at 07:20 AM.

08-23-2017, 08:34 AM	#10
12vchevydually Name: 12vchevydually Title: my mind is churnin! Status: Not Here Join Date: Jun 2006 Location: Jacksonville,FL Member`s Gallery Posts: 857	This breaks my heart!! Out of anyone in the diesel community with projects I wanted to see you get this done!!! I do know better then anyone life can get in the way of toys! If you need anything let me know!! __________________

08-23-2017, 08:40 AM	#11
97rada Name: 97rada Title: Too Much Time Status: Not Here Join Date: Feb 2008 Member`s Gallery Posts: 5,410	Any pictures of the chassis? I am here In Columbus. __________________ Austin tow truck- 14-3500 with tuning toy truck -94 rclb auto- 5.2x with a lot left. Shooting for 4s Any intelligent fool can make things bigger and more complex...it takes a touch of genius- and alot of courage to move in the opposite direction.

08-23-2017, 11:23 AM	#13
56cummins Name: 56cummins Title: Too Much Time Status: Not Here Join Date: Mar 2014 Member`s Gallery Posts: 736	I called Suncoast, guy on the phone doesn't know that number. Thanks for checking. __________________ 95 cummins

08-23-2017, 11:28 AM	#15
Signature600 Name: Signature600 Title: THA MAN! Status: Not Here Join Date: Aug 2006 Location: Jeffersonville, Ohio Member`s Gallery Posts: 11,974	I thought I got them all? I'll get a hold of you! Chris __________________ THANKS TO: Tim Barber @ TRE Diesel Jeff Mumau @ Mumau Diesel Service Rip @ Source Automotive Don Thuren @ ThurenFab Suspension Columbus Diesel Supply

08-23-2017, 11:36 AM	#16
joefarmer Name: joefarmer Title: MR. Supreme Overlord Status: Not Here Join Date: Jul 2006 Location: ohio Member`s Gallery Posts: 6,137	Fiberglass fenders, a box of belts, tubing, bed skins, wheels, slicks, etc. __________________ brandon'); DROP TABLE Users;-- 1948 Dodge 1.5t 12v RH swap \| 99 F250 12v RE test rkt \| 11 X5 'no soup' \| 08 F250 CR RE swap \| 05 2500 CR 68 standalone firepunk.com Last edited by joefarmer; 08-23-2017 at 11:48 AM.

08-23-2017, 12:40 PM	#18
Signature600 Name: Signature600 Title: THA MAN! Status: Not Here Join Date: Aug 2006 Location: Jeffersonville, Ohio Member`s Gallery Posts: 11,974	Does this work? Chris __________________ THANKS TO: Tim Barber @ TRE Diesel Jeff Mumau @ Mumau Diesel Service Rip @ Source Automotive Don Thuren @ ThurenFab Suspension Columbus Diesel Supply

08-23-2017, 02:19 PM	#19
slownoma Name: slownoma Title: Too Much Time Status: Not Here Join Date: Mar 2011 Member`s Gallery Posts: 816	Pm sent.

08-23-2017, 02:55 PM	#20
WUnderwood Name: WUnderwood Title: CompD Minion Status: Not Here Join Date: Aug 2006 Location: Texas Member`s Gallery Posts: 8,418	I can see it, Chris __________________ 2011 Ford F-150 Lariat 4X4 RIP BFD99, jponder, and Forrest Nearing