Catch can pics - Competition Diesel.Com

devon lock · 05-10-2012, 11:20 AM

Looking for pics of blow by catch cans. Trying to find some different ideas for building one.

diesel_importer · 05-10-2012, 02:46 PM

I built an ugly one that works, i'll try to take pics tonight.

Hurley · 05-10-2012, 03:24 PM

I smell a section of exhaust tubing, capped on both ends with flat discs, add fittings, breathers & drain valves to taste. (at least that's what's going on my not-so pretty truck)

impmouse · 05-10-2012, 07:01 PM

S-Max Catch Can, with EEIO technology

mathews8pt · 05-10-2012, 07:23 PM

I'm building one tonight, il take pics

morkable · 05-10-2012, 07:41 PM

I bought one like above, but in plastic. has a drain valve on the bottom

pinky49 · 05-11-2012, 08:19 AM

i used a 3 gallon moon tank and welded fittings for the vents and it drains back into the side of the block
ed

Hurley · 05-11-2012, 10:07 AM

Quote:

Originally Posted by pinky49

i used a 3 gallon moon tank and welded fittings for the vents and it drains back into the side of the block
ed

3 gallon tank.... nearly a dry sump system!

*UNBROKEN* · 05-11-2012, 10:21 AM

I'll get a pic of mine later. It's a small aluminum can Hellmann made for me...has a pair of 3/4" hose inlets then drains back to the factory block place. Has a 1" hose out the top to vent the fumes just like stock.

duallyspeed · 05-11-2012, 10:33 AM

This was free just my time because i had these parts in the garage. 2" exhaust pipe, i welded a nut to the bottom then used an injector tube rubber o ring on a nut to drain it. I welded 3 nuts to a plate then drilled them out to fit on the battery hold down bolt.

little6cylinder · 05-13-2012, 01:33 PM

Picture courtesy of CompD.

I believe its this catch can.

devon lock · 05-14-2012, 03:45 PM

Cool thanks for the pics!
I think I will build one, I have three breather lines that have to go to it.

joefarmer · 05-14-2012, 10:19 PM

I made mine from a bit of scrap 4" aluminum tubing. The picture is pretty horrible, but you get the picture.

05-10-2012, 11:20 AM	#1
devon lock Name: devon lock Title: 12 valve Status: Not Here Join Date: May 2008 Location: Fort St John B.C Member`s Gallery Posts: 419	Catch can pics Looking for pics of blow by catch cans. Trying to find some different ideas for building one. __________________ 96 12 valve, 10.036@ 135mph 1.498 60ft, 1213HP Fuel only Thanks to Ponci's Diesel, Supreme Diesel, Dynomite Diesel

05-10-2012, 02:46 PM	#2
diesel_importer Name: diesel_importer Title: Too Much Time Status: Not Here Join Date: Oct 2007 Location: Fairfield,TX Member`s Gallery Posts: 4,501	I built an ugly one that works, i'll try to take pics tonight. __________________ 01 QCSB 2WD AUTO: Redline/Smarty, Monster VP, 6x.013, S467 FMW, Goerend Trans, Caltracs. Fuel only - 11.85 @ 114, 50 Shot - 11.58 @ 116 w/ 1.69 60'

05-10-2012, 03:24 PM	#3
Hurley Name: Hurley Title: BLAKLUNG Status: Not Here Join Date: Apr 2008 Location: Statesville, NC Member`s Gallery Posts: 3,698	I smell a section of exhaust tubing, capped on both ends with flat discs, add fittings, breathers & drain valves to taste. (at least that's what's going on my not-so pretty truck) __________________ THIS IS COMPD. 95 2500 RCSB 2wd back-halfed and 4-linked 5x14/7mm +100cc/4k/11-blade billet 63/68/.91 T4 539/989 03 RCLB 4x4, SSR

05-10-2012, 07:23 PM	#5
mathews8pt Name: mathews8pt Title: Too Much Time Status: Not Here Join Date: May 2009 Location: central ohio Member`s Gallery Posts: 2,269	I'm building one tonight, il take pics __________________ Hobie 2000 QCSB, 180 pump, 6x.013's, maxspool 2.5, trans built by me, AD150, 64/80 compounds 11.51@119mph w/s468 single

05-11-2012, 08:19 AM	#7
pinky49 Name: pinky49 Title: Too Much Time Status: Not Here Join Date: Mar 2008 Member`s Gallery Posts: 280	i used a 3 gallon moon tank and welded fittings for the vents and it drains back into the side of the block ed __________________ PDRA The Pro Diesel Racers Association

05-10-2012, 07:01 PM	#4
impmouse Name: impmouse Title: loaf Status: Not Here Join Date: Nov 2006 Location: FISHERS,IN Member`s Gallery Posts: 940	S-Max Catch Can, with EEIO technology

05-10-2012, 07:41 PM	#6
morkable Name: morkable Title: Just Over Broke Status: Not Here Join Date: Jan 2008 Location: Stony Plain, Alberta Member`s Gallery Posts: 5,956	I bought one like above, but in plastic. has a drain valve on the bottom

05-11-2012, 10:21 AM	#9
UNBROKEN Name: UNBROKEN Title: Ezekiel 25:17 Status: Not Here Join Date: Apr 2006 Location: TEXAS Member`s Gallery Posts: 17,158	I'll get a pic of mine later. It's a small aluminum can Hellmann made for me...has a pair of 3/4" hose inlets then drains back to the factory block place. Has a 1" hose out the top to vent the fumes just like stock. __________________ I ain't got no damn diesel

05-11-2012, 10:33 AM	#10
duallyspeed Name: duallyspeed Title: New Speedway Boogie Status: Not Here Join Date: Jan 2009 Member`s Gallery Posts: 1,558	This was free just my time because i had these parts in the garage. 2" exhaust pipe, i welded a nut to the bottom then used an injector tube rubber o ring on a nut to drain it. I welded 3 nuts to a plate then drilled them out to fit on the battery hold down bolt. __________________ 01 dually 4x4

05-13-2012, 01:33 PM	#11
little6cylinder Name: little6cylinder Title: Everything is "fixable" Status: Not Here Join Date: Mar 2011 Location: Colorado Member`s Gallery Posts: 1,218	Picture courtesy of CompD. I believe its this catch can. __________________ 97 Dodge ECLB, Super Street Built at Granby Truck Shop Last edited by little6cylinder; 05-13-2012 at 01:41 PM.

05-14-2012, 03:45 PM	#12
devon lock Name: devon lock Title: 12 valve Status: Not Here Join Date: May 2008 Location: Fort St John B.C Member`s Gallery Posts: 419	Cool thanks for the pics! I think I will build one, I have three breather lines that have to go to it. __________________ 96 12 valve, 10.036@ 135mph 1.498 60ft, 1213HP Fuel only Thanks to Ponci's Diesel, Supreme Diesel, Dynomite Diesel