Crank Ventilation - Page 2 - Competition Diesel.Com

TruckYou · 09-01-2017, 12:43 PM

Yup 12v

Sent from my Pixel using Tapatalk

BigPapa · 09-01-2017, 01:15 PM

Then you already have #5, #6, and #9.

#'s 1, 3, and 7 aren't needed.

I'd say you'll also need a #11, 3903475.

So, your list will include:

(1) 3944797 Crankcase Breather
(1) 3680536 Tube Brace
(1) 3903475 Rectangular Ring Seal

I don't know what Snedge would sell these pieces for but my cost on them here at the shop would be just under $90 plus tax.

Financial Mistake · 09-01-2017, 02:13 PM

^ would go with that vs what I have. You'd have to get a Vc with an oil fill cap if you did the cover like I have.

Sent from my iPhone using Tapatalk

56cummins · 09-01-2017, 02:21 PM

Breather kit 12v

TrailTamer · 10-05-2017, 03:27 PM

Quote:

Originally Posted by 56cummins

Breather kit 12v

That price is astounding high. I bought my dual valve covers breather parts much cheaper than that from my local case dealer.

mfsuper90 · 10-06-2017, 09:49 AM

Does anyone run a vacuum pump like some of gassers are doing?

CorneliusRox · 10-06-2017, 10:23 AM

Quote:

Originally Posted by mfsuper90

Does anyone run a vacuum pump like some of gassers are doing?

I used to. The best bang for buck that I found was an EGR vacuum pump out of an early 2000's F150. It was $5 at a junk yard, 100% duty cycle, and will probably last forever with the relatively clean and cold air coming out of the crank vent (compared to exhaust gasses it was made for).

09-01-2017, 01:15 PM	#22
BigPapa Name: BigPapa Title: Truckless Status: Here Join Date: Jan 2008 Location: Springfield, TN Member`s Gallery Posts: 5,041	Then you already have #5, #6, and #9. #'s 1, 3, and 7 aren't needed. I'd say you'll also need a #11, 3903475. So, your list will include: (1) 3944797 Crankcase Breather (1) 3680536 Tube Brace (1) 3903475 Rectangular Ring Seal I don't know what Snedge would sell these pieces for but my cost on them here at the shop would be just under $90 plus tax. __________________ Scott 2003 Avalanche Z71 Common sense is like deodorant. The people that need it most never use it.

09-01-2017, 02:13 PM	#23
Financial Mistake Name: Financial Mistake Title: Too Much Time Status: Not Here Join Date: Apr 2017 Member`s Gallery Posts: 278	^ would go with that vs what I have. You'd have to get a Vc with an oil fill cap if you did the cover like I have. Sent from my iPhone using Tapatalk __________________ P24V, Billet 62/68/14, Billet 475/96/1.32, 27°, Seth's Stg 3 @ 450cc, dual feed, DFI 7x12, Fass240, 110#, 425, p&p/3 angle/oring, ED freeze plugs, BD IC, VP MAX boots, stainless mani, Snow w/m, coolant bypass, CTS2, EAS, POS NV4500, valair quiet dual ceramic

09-01-2017, 02:21 PM	#24
56cummins Name: 56cummins Title: Too Much Time Status: Not Here Join Date: Mar 2014 Member`s Gallery Posts: 736	Breather kit 12v __________________ 95 cummins

10-06-2017, 09:49 AM	#26
mfsuper90 Name: mfsuper90 Title: 300ft is all I need Status: Not Here Join Date: Feb 2013 Location: Southeast ohio Member`s Gallery Posts: 769	Does anyone run a vacuum pump like some of gassers are doing? __________________ ’82 300D benz Bosch MW turned up, HX30, W/A Intercooler MF Super 90 various odds and ends done. Farm stocker MF 98 3-71 screaming jimmy. Needs N90's. Another farm stock '14 Ram Anarchy EFI, G56

09-01-2017, 12:43 PM	#21
TruckYou Name: TruckYou Title: Diesel Enthusiast Status: Not Here Join Date: Dec 2016 Member`s Gallery Posts: 132	Yup 12v Sent from my Pixel using Tapatalk