Holset Turbos - Competition Diesel.Com

Cummins12Club · 11-05-2014, 06:41 PM

I have acquired a few Holset chargers that I would like to sell here's the info I have:

1st HT4C new reman unit, never installed since rebuild. Shaft play is like new. I am unsure of exhaust housing size but can provide numbers on the housing to interested buys asking $500 shipped to lower 48 states

2nd is another HT4C stock take off. Unknown miles but shaft play seems to be within tolerance. Compressor wheel has some very minute chips and could use a good cleaning. Unsure on exhaust housing size but can provide interested buyer serial numbers on the exhaust housing asking $300 shipped to lower 48 states

Last is an HT3C this charger was also a new reman and has not been on a truck. It could use cleaning for it appears to have been setting a while, shaft play is like new, unsure of exhaust housing size on this unit as well asking $400 shipped to lower 48 states

PM with any interest, questions or concerns, thanks

Sent from my iPhone using Tapatalk

Cummins12Club · 11-05-2014, 08:28 PM

Used HT4C has been sold

SuperiorRam · 11-05-2014, 09:17 PM

Bump for some good deals
Side note you don't happen to have the elbow off of the bht3c do ya?

Cummins12Club · 11-05-2014, 09:23 PM

Quote:

Originally Posted by SuperiorRam

Bump for some good deals
Side note you don't happen to have the elbow off of the bht3c do ya?

I will have to look tomorrow and let you know, I want to say no but I'll check for sure

DieselheaD · 11-05-2014, 09:48 PM

Put that bht3c back on the shelf, I'll buy it in a couple months lol

Cummins12Club · 11-06-2014, 05:16 AM

Quote:

Originally Posted by DieselheaD

Put that bht3c back on the shelf, I'll buy it in a couple months lol

Lol never know, it may still be here haha

Cummins12Club · 11-07-2014, 06:09 PM

Bump $450 shipped for the new HT4C and $350 shipped for the new BHT3C would like to move these

Cummins12Club · 11-08-2014, 06:05 PM

New HT4C sold, BHT3C still up for grabs

90dodge · 11-08-2014, 06:44 PM

What is the difference between the ht3c and 3b?

Headcase98002 · 11-08-2014, 08:40 PM

From what I could gather from an old retiree, the 3C is a newer design with the MWE groove? Not certain though.

Is it a 76mm wheel?

Cummins12Club · 11-08-2014, 09:40 PM

Quote:

Originally Posted by Headcase98002

From what I could gather from an old retiree, the 3C is a newer design with the MWE groove? Not certain though.

Is it a 76mm wheel?

Not sure I'll have to measure it with my calipers tomorrow

jimbo486 · 11-09-2014, 11:44 AM

I spy a 23cm housing on the BHT3C and maybe a 26cm(?) housing on the take-off BHT4C.

Cummins12Club · 11-09-2014, 02:31 PM

Quote:

Originally Posted by jimbo486

I spy a 23cm housing on the BHT3C and maybe a 26cm(?) housing on the take-off BHT4C.

Yea this 3C would probably work pretty well on a street budget compound set up

Cummins12Club · 11-09-2014, 02:51 PM

Just sold the last turbo, thanks compd!

Cummins12Club · 11-24-2014, 05:50 PM

Well a deal fell through and the new BHT3C is back up forsale, price dropped to $350 shipped

G1625S · 11-25-2014, 09:56 AM

I would take it. Your pm box is full. Call/text 6076215373.

11-05-2014, 06:41 PM	#1
Cummins12Club Name: Cummins12Club Title: Happy Dinosaur Status: Not Here Join Date: Jan 2013 Location: Too Far From the Action Member`s Gallery Posts: 979	Holset Turbos I have acquired a few Holset chargers that I would like to sell here's the info I have: 1st HT4C new reman unit, never installed since rebuild. Shaft play is like new. I am unsure of exhaust housing size but can provide numbers on the housing to interested buys asking $500 shipped to lower 48 states 2nd is another HT4C stock take off. Unknown miles but shaft play seems to be within tolerance. Compressor wheel has some very minute chips and could use a good cleaning. Unsure on exhaust housing size but can provide interested buyer serial numbers on the exhaust housing asking $300 shipped to lower 48 states Last is an HT3C this charger was also a new reman and has not been on a truck. It could use cleaning for it appears to have been setting a while, shaft play is like new, unsure of exhaust housing size on this unit as well asking $400 shipped to lower 48 states PM with any interest, questions or concerns, thanks Sent from my iPhone using Tapatalk __________________ 93 Dodge, going racing. Special Thanks to Tim Wright & Pro Street Diesel

11-05-2014, 08:28 PM	#2
Cummins12Club Name: Cummins12Club Title: Happy Dinosaur Status: Not Here Join Date: Jan 2013 Location: Too Far From the Action Member`s Gallery Posts: 979	Used HT4C has been sold __________________ 93 Dodge, going racing. Special Thanks to Tim Wright & Pro Street Diesel

11-05-2014, 09:17 PM	#3
SuperiorRam Name: SuperiorRam Title: Too Much Time Status: Not Here Join Date: Dec 2008 Location: Northern Minnesota Member`s Gallery Posts: 1,239	Bump for some good deals Side note you don't happen to have the elbow off of the bht3c do ya? __________________ 97 12v 5spd 83 Grumman Olson bread van 4bt and a chev nv4500 83 RCSB 12V almost all the way in cab more fiberglass than steel SRT Challenger 6 speed

11-07-2014, 06:09 PM	#7
Cummins12Club Name: Cummins12Club Title: Happy Dinosaur Status: Not Here Join Date: Jan 2013 Location: Too Far From the Action Member`s Gallery Posts: 979	Bump $450 shipped for the new HT4C and $350 shipped for the new BHT3C would like to move these __________________ 93 Dodge, going racing. Special Thanks to Tim Wright & Pro Street Diesel

11-08-2014, 06:05 PM	#8
Cummins12Club Name: Cummins12Club Title: Happy Dinosaur Status: Not Here Join Date: Jan 2013 Location: Too Far From the Action Member`s Gallery Posts: 979	New HT4C sold, BHT3C still up for grabs __________________ 93 Dodge, going racing. Special Thanks to Tim Wright & Pro Street Diesel

11-05-2014, 09:48 PM	#5
DieselheaD Name: DieselheaD Title: Too Much Time Status: Not Here Join Date: Jun 2007 Location: CA Member`s Gallery Posts: 2,731	Put that bht3c back on the shelf, I'll buy it in a couple months lol

11-08-2014, 08:40 PM	#10
Headcase98002 Name: Headcase98002 Title: Too Much Time Status: Not Here Join Date: Sep 2010 Location: Edinburgh, Indiana Member`s Gallery Posts: 1,631	From what I could gather from an old retiree, the 3C is a newer design with the MWE groove? Not certain though. Is it a 76mm wheel? __________________ 1998 QCDRW 4x4 - p24v, 4k's, 024's, SAC 6x.013's, s363/68/.83 - HT4B, BD Intercooler, ATS T4 Manifold, 6" Exhaust, FirePunk Trans, Hamilton Springs & Push Rods, ISS Pro Gauges, exc.....

11-09-2014, 11:44 AM	#12
jimbo486 Name: jimbo486 Title: Too Much Time Status: Not Here Join Date: Jan 2010 Location: Orange County, CA Member`s Gallery Posts: 1,617	I spy a 23cm housing on the BHT3C and maybe a 26cm(?) housing on the take-off BHT4C. __________________ 1990 Dodge D350 Giles' 12mm VE - Airdog II 165 - 370s @ 75lpm - BW S362fmw/68/12 - Hamilton 182/214 - '01 NV5600 Last edited by jimbo486; 11-09-2014 at 11:46 AM.

11-09-2014, 02:51 PM	#14
Cummins12Club Name: Cummins12Club Title: Happy Dinosaur Status: Not Here Join Date: Jan 2013 Location: Too Far From the Action Member`s Gallery Posts: 979	Just sold the last turbo, thanks compd! __________________ 93 Dodge, going racing. Special Thanks to Tim Wright & Pro Street Diesel

11-24-2014, 05:50 PM	#15
Cummins12Club Name: Cummins12Club Title: Happy Dinosaur Status: Not Here Join Date: Jan 2013 Location: Too Far From the Action Member`s Gallery Posts: 979	Well a deal fell through and the new BHT3C is back up forsale, price dropped to $350 shipped __________________ 93 Dodge, going racing. Special Thanks to Tim Wright & Pro Street Diesel

11-25-2014, 09:56 AM	#16
G1625S Name: G1625S Title: Too Much Time Status: Not Here Join Date: Aug 2009 Location: Kirkwood, NY Member`s Gallery Posts: 340	I would take it. Your pm box is full. Call/text 6076215373. __________________ f350 sitting in shop on blocks