Dual cp3 parts. - Competition Diesel.Com

450rbronco · 08-22-2014, 07:45 PM

Where can I pick up some hard parts for building my own dual fueler setup. I already have pump coolant hose and controller connections. The feed and return should be easy. I need to find a pump bracket and I wanted to go with a flex hp line to feed rail but what is the best way to do that?

Sent from my iPhone using Tapatalk

redcummins04 · 08-22-2014, 09:32 PM

http://www.motorsportdiesel.com/stor...-10799438.aspx

Good luck trying to get a hold of him.

QIKDSL · 09-06-2014, 11:10 PM

I built my own setup and actually made 2 of just about everything if you are interested..

dieseloutlaw98 · 09-06-2014, 11:29 PM

Just a thought. I have seen p pumps on isc's. A caps2 pump has the same mounting pattern. Couldn't one use this pump versus two cp3's? The caps2 is rated at 2100 bar. As far as fuel flow idk how it stacks up. Maybe someone can chime in.

08-22-2014, 07:45 PM	#1
450rbronco Name: 450rbronco Title: Too Much Time Status: Not Here Join Date: Oct 2010 Member`s Gallery Posts: 303	Dual cp3 parts. Where can I pick up some hard parts for building my own dual fueler setup. I already have pump coolant hose and controller connections. The feed and return should be easy. I need to find a pump bracket and I wanted to go with a flex hp line to feed rail but what is the best way to do that? Sent from my iPhone using Tapatalk __________________ 05 cummins QC smarty,garmon,super B special, arson III, 2nd gen man, raptor,afe, simpson diesel,ladder bars.[/U][/U]

08-22-2014, 09:32 PM	#2
redcummins04 Name: redcummins04 Title: Too Much Time Status: Not Here Join Date: Jan 2009 Location: PA Member`s Gallery Posts: 352	http://www.motorsportdiesel.com/stor...-10799438.aspx Good luck trying to get a hold of him. __________________ 2004 Q/C SB 4x4 6 speed, 363/488,Innovative Diesel

09-06-2014, 11:10 PM	#3
QIKDSL Name: QIKDSL Title: Too Much Time Status: Not Here Join Date: Jan 2008 Location: Ocean Springs, MS Member`s Gallery Posts: 511	I built my own setup and actually made 2 of just about everything if you are interested.. __________________ 04 CR 4wd Lowered Built Motor, Big Air, Big Fuel, Built trans. Just the usual.

09-06-2014, 11:29 PM	#4
dieseloutlaw98 Name: dieseloutlaw98 Title: Green Behind the Ears Status: Not Here Join Date: Aug 2011 Member`s Gallery Posts: 68	Just a thought. I have seen p pumps on isc's. A caps2 pump has the same mounting pattern. Couldn't one use this pump versus two cp3's? The caps2 is rated at 2100 bar. As far as fuel flow idk how it stacks up. Maybe someone can chime in. __________________ 2010 Ram 3500 single wheel cclb 4x4. Mostly stock