roller rockers

i had to call a supplier today to order some poly locks for their rockers, after placing the order i asked him if they ever looked into making rockers for the cummins 5.9. he said he has 1 set of each (12v & 24v) out at a shop right now for testing. he said the 12v set is on a street truck for durability testing.
he said to check back in about a month. he would'nt state the shops that had them.

scot

I would be curious to see if there were any gains on a motor that turned less than 3500rpm..

partsguy662 said:

I would be curious to see if there were any gains on a motor that turned less than 3500rpm..

Click to expand...

When you free up any friction in a rotating assembly, every little bit helps. IMHO

You can send the rockers out to Jesel and they rollerize it and ship them back to ya. They won't be a 'full roller' design, but it does take some friction away.

I'll try to post some pics of some....