roller rockers - Competition Diesel.Com

oil-burner · 01-18-2007, 04:54 PM

i had to call a supplier today to order some poly locks for their rockers, after placing the order i asked him if they ever looked into making rockers for the cummins 5.9. he said he has 1 set of each (12v & 24v) out at a shop right now for testing. he said the 12v set is on a street truck for durability testing.
he said to check back in about a month. he would'nt state the shops that had them.

scot

partsguy662 · 01-18-2007, 05:10 PM

I would be curious to see if there were any gains on a motor that turned less than 3500rpm..

RacinDuallie · 01-19-2007, 07:36 AM

Quote:

Originally Posted by partsguy662

I would be curious to see if there were any gains on a motor that turned less than 3500rpm..

When you free up any friction in a rotating assembly, every little bit helps. IMHO

You can send the rockers out to Jesel and they rollerize it and ship them back to ya. They won't be a 'full roller' design, but it does take some friction away.

I'll try to post some pics of some....

01-18-2007, 04:54 PM	#1
oil-burner Name: oil-burner Title: Too Much Time Status: Not Here Join Date: Jul 2006 Location: york, pa Member`s Gallery Posts: 318	roller rockers i had to call a supplier today to order some poly locks for their rockers, after placing the order i asked him if they ever looked into making rockers for the cummins 5.9. he said he has 1 set of each (12v & 24v) out at a shop right now for testing. he said the 12v set is on a street truck for durability testing. he said to check back in about a month. he would'nt state the shops that had them. scot

01-18-2007, 05:10 PM	#2
partsguy662 Name: partsguy662 Title: You know damm right Status: Not Here Join Date: Apr 2006 Location: Eau Claire, WI Member`s Gallery Posts: 6,244	I would be curious to see if there were any gains on a motor that turned less than 3500rpm.. __________________ Life rewards the ones who try until they've got it down.. --Scott COMPETITIONDIESEL.COM