CTD2500
Brown Between the Cheeks
I have a used Garrett GTA4202 for sale. It was removed from a 1995 12v, where it was used as a primary in a set of compounds. It has a billet 74mm compressor wheel. The turbine housing is a 1.01 A/R T6, with the common 5" exhaust outlet. It spooled very well; for comparison, I ran a 1.15 A/R wastegated housing prior to this one, and the 1.01 spooled much faster with the same EGTs. A good primary for towing or DD.
Operated well when removed for a smaller primary. I have not taken it apart to inspect it since removal, and so it will be sold as is. It was a remanned 50 Series Detroit unit when I bought it, and I added the 4202 backplate, compressor housing and billet wheel (yes, it was balanced) before installing. Less than 10,000 KM have been put on it since then.
Looking for $400 USD shipped.
Operated well when removed for a smaller primary. I have not taken it apart to inspect it since removal, and so it will be sold as is. It was a remanned 50 Series Detroit unit when I bought it, and I added the 4202 backplate, compressor housing and billet wheel (yes, it was balanced) before installing. Less than 10,000 KM have been put on it since then.
Looking for $400 USD shipped.