Overall, in my estimation the encore/storm block is better despite the smaller mains. It is possible to drill and tap the mains by hand as well. You need something to guide the bit/tap to keep everything straight though. I've done it and it works. It requires a couple hours, metal duct tape, an extra long 15/32" or 12mm drill bit (iirc) and an extra long m14 tap. And some sort of lube. I used motor oil
Sent from my SGH-I747M using Tapatalk
__________________
2003 F250 SD 4x4 3.73 SCSB - Rebuilt VE Cummins with all the bells and whistles in an attempt to blow all my money. objective complete.
Last edited by rlebar; 10-16-2014 at 11:42 AM.
|