Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > Tech Area- Dodge > Dodge Tech > 94-98 2nd Gen. 12V
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Closed Thread
 
Thread Tools
Old 03-17-2017, 10:21 AM   #21
turbo2387
 
turbo2387's Avatar

Name: turbo2387
Title: Nipple Fluffer
Status: Not Here
Join Date: Jun 2011
Location: Indiana
Member`s Gallery
Posts: 665
apple for oranges, cylinder pressure would be the same if stock was 14* with 260 bar injectors vrs 16* timing and 280 bar injectors. the pump says go earlier but the injector say wait, just a bit longer than stock.
 
Old 03-17-2017, 10:51 AM   #22
Smokem
 
Smokem's Avatar

Name: Smokem
Title: Turbler
Status: Not Here
Join Date: May 2006
Location: Iowa
Member`s Gallery
Posts: 5,565
There are too many variables to state there is a linear correlation between opening pressure and timing reduction.
__________________
Infinite Performance
 
Old 03-17-2017, 10:56 AM   #23
j.fondler
 
j.fondler's Avatar

Name: j.fondler
Title: Slow Learner
Status: Not Here
Join Date: Nov 2016
Location: SD/TX
Member`s Gallery
Posts: 560
Quote:
Originally Posted by turbo2332 View Post
12 valve stuff and what it does

Stock turbos

There are tons of hybrid parts that can now be installed on a stock charger. Most of which are hx40 parts. The turbine shaft is the same diameter allowing for many different options. Compressor wheels from 60mm to 67mm and hx40 turbines in 64 and 67mm, 10 and 12 blade configurations. Turbine and bearing housings can be machined to fit these parts. You can buy aftermarket turbine housings for the HX35’s which open up the exhaust flow a bit.

H1c 56/58/16,18 or 21cm bolts together 3 inch outlet (first gen)
Wh1c 56/58/12 bolts together 3 (early 2nd gen)
Hx35 56/58/12 large snap ring 3 (late 2nd gen)
He341 56/58/9 large snap ring 3 (vp44 24 valve automatics)
He351cw 58/60/9 large snap ring 4.4inch outlet
(early common rail)
some corrections should be made to this. all H1C/WH1C/HX-35 share the same turbine, which is 70/60. the compressors are as follows

"baby" H1C - 50mm (non-intercooled 89-91 trucks)
"big" H1C - 54mm (intercooled 91.5-93 trucks)
H1C's came with either an 18cm or 21cm exhaust housing

WH1C - 56mm (1994) - 12cm exhaust housing

HX35 - 56mm (8 blade until 1998, 7 blade after) - 12 cm exhaust housing

Hy35 - 56mm (98.5+ auto trucks?) - 9cm exhaust housing

he341 - don't know anything about it.

He351 - 60mm(it's more like 59.5mm) with a 65/58mm turbine and a 9.5cm exhaust housing.
__________________
51 F5 - 93 w250 chassis - VE/47rh/np205
67 d100 - 89 d350 srw chassis - VE/a518
93 w250 - VE/47rh/NP205 - BAJA!!!!
12 3500 - studZ, deleteZ, tuneZ
 
Old 03-17-2017, 08:20 PM   #24
Stox5225
 
Stox5225's Avatar

Name: Stox5225
Title: Green Behind the Ears
Status: Not Here
Join Date: Nov 2016
Location: Lillington, NC
Member`s Gallery
Posts: 97
Quote:
Originally Posted by turbo2332 View Post
apple for oranges, cylinder pressure would be the same if stock was 14* with 260 bar injectors vrs 16* timing and 280 bar injectors. the pump says go earlier but the injector say wait, just a bit longer than stock.


That's what I was referring to. So MY injectors are 282 BAR at 18* timing. So it's the same as stock injectors at 16*. Ish lol


Sent from my iPhone using Tapatalk
__________________
1997 Cummins 2500; NV4500HD; SB DD; 315/75R16; 3rd Gen Track Bar; 63/65/14; AFC Live; 7mm DV's; 4 GSK; Mac Rack Plug; Custom Fuel System; 5x.012; Colt Cam Big Stick; 60# Springs; PDD Stage 1 Push Rods; O-Ring Head; Head Studs; Fluidampr; Boost/EGT/FP Gauges
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:26 PM.

 


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com