Advertisement |
|
|
|
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
|
11-14-2008, 08:44 AM
|
#1
|
Name: PRattenbury
Title: Neophyte
Status: Not Here
Join Date: Jan 2007
Location: Connecticut
Member`s Gallery
Posts: 1,095
|
Simple 'Timing for Dummies' question
When setting timing on a 12 valve engine with a p-pump, what are we really trying to time the injection event to? Valves closing? Piston at TDC?
__________________
1994 2500 4x4 with a couple mods
If corn oil is made from corn and vegetable oil is made from vegetables, what is baby oil made from?
|
|
|
11-14-2008, 08:52 AM
|
#2
|
Name: dzlfarmboy
Title: Supporting Vendor
Status: Not Here
Join Date: Jun 2006
Location: Eastern Shore of Maryland
Member`s Gallery
Posts: 2,448
|
When the #1 injector is firing in relation to where the # 1 piston is when traveling up on the compresion stroke. How many crank shaft degrees it is before the piston get's to the TDC
__________________
F1 Diesel,HTT,Goerend Trans,410-490-6075
|
|
|
11-14-2008, 09:05 AM
|
#3
|
Name: GRotman
Title: Chief Indian
Status: Not Here
Join Date: Jul 2006
Location: Allendale,Mi
Member`s Gallery
Posts: 2,516
|
Port closure on the barrel vs. degrees from TDC for #1 cyl.
|
|
|
11-14-2008, 11:10 AM
|
#4
|
Name: PRattenbury
Title: Neophyte
Status: Not Here
Join Date: Jan 2007
Location: Connecticut
Member`s Gallery
Posts: 1,095
|
Okay, so if the injection event occurs too early in the piston's ride up to TDC, the engine tends to get noisy, no?
__________________
1994 2500 4x4 with a couple mods
If corn oil is made from corn and vegetable oil is made from vegetables, what is baby oil made from?
|
|
|
11-14-2008, 11:23 AM
|
#5
|
Name: GRotman
Title: Chief Indian
Status: Not Here
Join Date: Jul 2006
Location: Allendale,Mi
Member`s Gallery
Posts: 2,516
|
Yes
|
|
|
11-14-2008, 12:21 PM
|
#6
|
Name: PRattenbury
Title: Neophyte
Status: Not Here
Join Date: Jan 2007
Location: Connecticut
Member`s Gallery
Posts: 1,095
|
The reason I ask is if I'm finding what I think is TDC by using the #1 plunger OR by valve drop method, those two readings being based on the cam gear, if the cam has been degreed I am not seeing true TDC unless I'm basing my observation off the piston, marking when the piston stops rising, and then when the piston begins to fall (both valves being closed). My engine is really noisy, IMHO. And the timing is supposed to be set on the stand at 24 degrees, which shouldn't be too obnoxious. My theory is maybe I'm not using true TDC and I'm running more timing than I think. Could that be true? At what level of timing would the motor start to get loud, all things being correct? 30? 36?
__________________
1994 2500 4x4 with a couple mods
If corn oil is made from corn and vegetable oil is made from vegetables, what is baby oil made from?
|
|
|
11-14-2008, 12:28 PM
|
#7
|
Name: Signature600
Title: THA MAN!
Status: Not Here
Join Date: Aug 2006
Location: Jeffersonville, Ohio
Member`s Gallery
Posts: 11,974
|
Well, at some point or another you should have found TDC on the #1 piston...I use the drop valve method.
Then, you would have set the timing from the #1 injection plunger...there is no way to find TDC from the pump to my knowledge.
Chris
__________________
THANKS TO:
Tim Barber @ TRE Diesel
Jeff Mumau @ Mumau Diesel Service
Rip @ Source Automotive
Don Thuren @ ThurenFab Suspension
Columbus Diesel Supply
|
|
|
11-14-2008, 01:47 PM
|
#8
|
Name: PRattenbury
Title: Neophyte
Status: Not Here
Join Date: Jan 2007
Location: Connecticut
Member`s Gallery
Posts: 1,095
|
Yeah, it's been a couple years since I did timing on a p-pump. I had good instructions, and easily followed them with good results. Maybe I'm barking up the wrong tree. But I wanted to verify my timing is what I think it is to eliminate it as a possibility for the cause of how noisy the engine is. It doesn't sound like something's broken, it just sounds like too much timing. I was warned, though, that trying to fool with too many different things isn't gonna be a good idea, since the cam is degreed and so forth. I guess I'm in over my head, but I gotta learn somehow, I guess. Or start growing a money tree and find someone willing to make money to get it right...
__________________
1994 2500 4x4 with a couple mods
If corn oil is made from corn and vegetable oil is made from vegetables, what is baby oil made from?
|
|
|
11-14-2008, 02:42 PM
|
#9
|
Name: JGK
Title: Been around
Status: Not Here
Join Date: Jun 2007
Location: Boise
Member`s Gallery
Posts: 194
|
Like Sig'600 does, I've always used the drop-valve method of finding TDC and I think it'll get you to within an half degree or better if done carefully.
-Jay
__________________
'98 2500 12V 5spd 4X4 QC LB. custom plate, DDP4's, timing: 18.5*, compound spinners, PDR cam, PDR ported head, 3K GSK, SB DD, etc.
|
|
|
11-14-2008, 03:22 PM
|
#10
|
Name: SixOhh
Title: EPA unfriendly
Status: Not Here
Join Date: Aug 2008
Location: Magnolia, TX
Member`s Gallery
Posts: 1,108
|
if you truly think its "timing noise", then take the time to back her off a few degrees. if she clears up, you know where your at. if not, might be another issue.
good luck either way!
-marcus
__________________
07' Silver 2500 5.9 4x4 LWB
Goerend 48re-csp5/EFI- T&C Mild Cp3-F1 Apex 7.5 -S369sxe Amsoil
Coolant Bypass -Airdog-D&J- Hamilton 188/220 -AFE-ARP Opti-Lube
H-Town Off-Road
|
|
|
11-14-2008, 03:35 PM
|
#11
|
Name: PRattenbury
Title: Neophyte
Status: Not Here
Join Date: Jan 2007
Location: Connecticut
Member`s Gallery
Posts: 1,095
|
That would answer the question, either way. We shall see. Thanks for the input, guys. I appreciate it, as always.
__________________
1994 2500 4x4 with a couple mods
If corn oil is made from corn and vegetable oil is made from vegetables, what is baby oil made from?
|
|
|
11-14-2008, 03:53 PM
|
#12
|
Name: SixOhh
Title: EPA unfriendly
Status: Not Here
Join Date: Aug 2008
Location: Magnolia, TX
Member`s Gallery
Posts: 1,108
|
keep us posted!
__________________
07' Silver 2500 5.9 4x4 LWB
Goerend 48re-csp5/EFI- T&C Mild Cp3-F1 Apex 7.5 -S369sxe Amsoil
Coolant Bypass -Airdog-D&J- Hamilton 188/220 -AFE-ARP Opti-Lube
H-Town Off-Road
|
|
|
05-07-2009, 11:48 AM
|
#13
|
Name: DTanklage
Title: Banned
Status: Not Here
Join Date: Jan 2009
Member`s Gallery
Posts: 1,315
|
what did you find out?
and if timing is related to mm of lift why is there not a sticky with a chart in this forum?
xmm = x°
help
thanks, don
|
|
|
05-07-2009, 12:13 PM
|
#14
|
Name: schaef_12
Title: Diesel Junkie
Status: Not Here
Join Date: Oct 2007
Location: Ferdinand, ID
Member`s Gallery
Posts: 248
|
I would think that 24* would be fairly noisy, IMO.
__________________
04' 555.
|
|
|
05-07-2009, 12:15 PM
|
#15
|
Name: PRattenbury
Title: Neophyte
Status: Not Here
Join Date: Jan 2007
Location: Connecticut
Member`s Gallery
Posts: 1,095
|
Never really got to it yet. I've been fooling with turbos forever. Had it running on a single 64 briefly in April. Now back apart again trying to get the tubular header/S470 setup worked out. Strangely enough, I have an II 13mm pump, and I've never seen a lift chart for that pump.
__________________
1994 2500 4x4 with a couple mods
If corn oil is made from corn and vegetable oil is made from vegetables, what is baby oil made from?
|
|
|
05-07-2009, 12:16 PM
|
#16
|
Name: DTanklage
Title: Banned
Status: Not Here
Join Date: Jan 2009
Member`s Gallery
Posts: 1,315
|
Quote:
Originally Posted by PRattenbury
Strangely enough, I have an II 13mm pump, and I've never seen a lift chart for that pump.
|
then how in the heck do you time it????????
|
|
|
05-07-2009, 01:03 PM
|
#17
|
Name: CSnyder
Title: Snyder-Motorsports
Status: Not Here
Join Date: Mar 2008
Member`s Gallery
Posts: 6,278
|
I would set it by dropped valve and then push in the timing pin to verify it. Once you have it verified its at TDC I would mark the balancer at the center of the Tach sensor and pull the timing pin out. Then pull the 15/16" plug near the GSK plug and rotate the engine until the pump tab is centered in the hole. Remark pump TDC on the Tach sensor and measure the distance. For 15 1/2 degrees you will have about 1/4" between marks for reference on a 12 1/2 degree engine stock. Otherwise find someone to loan you the Miller tool kit or buy one to get it accurate.
__________________
Alot of my life is easier thanks to Mumau Diesel! and Goerend Transmission
There is a HUGE difference between cocky and confident when it comes to engine building.
|
|
|
05-07-2009, 01:32 PM
|
#18
|
Name: mondtster
Title: Too Much Time
Status: Not Here
Join Date: Jan 2009
Location: k74
Member`s Gallery
Posts: 1,206
|
Quote:
Originally Posted by DTanklage
then how in the heck do you time it????????
|
Timing is more or less when the injection event begins in relation to piston TDC. The plunger lift charts are simply an easy way to set the timing and are not necessary. You can just set the crank to the desired time before TDC (say 18 degrees) and roll the pump over until the point at which the plunger feed ports are just covered up. This is called "spill port timing." If he really wanted to know what the plunger lift at TDC for that 18 degrees of timing is then he could just roll it over to TDC and measure the plunger lift for a bit easier reference.
|
|
|
05-07-2009, 02:08 PM
|
#19
|
Name: DTanklage
Title: Banned
Status: Not Here
Join Date: Jan 2009
Member`s Gallery
Posts: 1,315
|
i see
at what lift in a 215 pump does this occur (port just covered)
does it vary from pump to pump?
if so the lift method would not be dead on would it?
|
|
|
05-07-2009, 02:19 PM
|
#20
|
Name: BluegrassDiesel
Title: UK2K!
Status: Not Here
Join Date: Apr 2007
Location: KENTUCKY
Member`s Gallery
Posts: 4,136
|
Here is a link to a timing chart from PDRs old website. The lift values for desired timing vary between different pump models (160,175,180,215).
PDR Diesel Inc. The turbo diesel performance specialists! - P7100 Timing
I dont believe that method is 100% dead on accurate but we have used it several times without any issues. I believe the best way is to have the pump lock timed at 0° and then set timing off of the balancer.
__________________
Josh Land
Bluegrass Diesel Performance
Lancaster, Ky
SHOP ONLINE @ http://WWW.SHOPBLUEGRASS.COM
97 DodgePPL Limited Pro Stock "The Crippler"
09 3500 GMC CCDually
05 Silverado SS
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 06:04 AM.
|