Gorilla girdle spacers

ryanss22

ryanss22

New member
Long shot here but for a 5.9 cummins gorilla girdle kit would anyone happen to have the "upper" spacers that sit over he 12pt nuts on the studs and the girdle goes on over? Looking for all 14 of them. Industrial injection will not sell them seperate.
 
I can take measurements of them Friday and maybe you can have them made at machine shop. Also maybe try seeing if one of the II guys on here can help you out.
 
Yes the round ones. Have the bigger hole in the kit
That was going to be my next move youngdiesel. If you'd be willing to help me out with the measurement that'd be awesome and much appreciated!!
 
Im mainly needing the thickness off them as they down over the nut so far and keep the girdle within .010s of thr oil pan rail.. if someone has a kit not installed yet and could just take a measurement with a set of micrometers thays be super helpful
 
Last edited:
Run a straight edge across the pan rails and then measure down to the main caps

Sent from my SAMSUNG-SM-G890A using Tapatalk
 
You must log in or register to reply here.
Back
Top