Advertisement |
|
|
|
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
|
06-20-2012, 12:34 AM
|
#1
|
Name: RonA
Title: Too Much Time
Status: Not Here
Join Date: Feb 2008
Location: Liberal ground zero.
Member`s Gallery
Posts: 11,058
|
Old ugly with 6.7.
Another video of startup from behind the truck. Truck only sat for 2 days and it was at the end of a warm day so there was less smoke on startup(still starts up fairly quick). I tried to show gauges at cruise and smoke level taking off cold. Pretty shakey video.
RonA
__________________
55 years of work and all I got was a T-shirt.
Last edited by RonA; 06-20-2012 at 12:35 AM.
|
|
|
06-20-2012, 12:12 PM
|
#2
|
Name: RonA
Title: Too Much Time
Status: Not Here
Join Date: Feb 2008
Location: Liberal ground zero.
Member`s Gallery
Posts: 11,058
|
Watching that video will give you motion sickness. All it shows it 600deg cruise egt at 60mph and 5psi with 750deg egt up the grade at 10psi boost. The pickup with trailer was going about 40-45mph and the pass was made at about 1/2 throttle or so and saw 1000-1050 deg at about 90mph with about a 50/50 split on pressures(50 total with 26 from the primary). TC was unlocked the whole time.
__________________
55 years of work and all I got was a T-shirt.
|
|
|
06-20-2012, 12:44 PM
|
#3
|
Name: little6cylinder
Title: Everything is "fixable"
Status: Not Here
Join Date: Mar 2011
Location: Colorado
Member`s Gallery
Posts: 1,218
|
That thing starts awesome Ron! Looks really easy and comfortable to drive too! Good work!
Those BB Garret's spool awesome! Do you run the cast wheels in them or billet?
__________________
97 Dodge ECLB, Super Street
Built at Granby Truck Shop
Last edited by little6cylinder; 06-20-2012 at 12:57 PM.
|
|
|
06-20-2012, 01:59 PM
|
#4
|
Name: RonA
Title: Too Much Time
Status: Not Here
Join Date: Feb 2008
Location: Liberal ground zero.
Member`s Gallery
Posts: 11,058
|
Quote:
Originally Posted by little6cylinder
That thing starts awesome Ron! Looks really easy and comfortable to drive too! Good work!
Those BB Garret's spool awesome! Do you run the cast wheels in them or billet?
|
Comfortable to drive? Yep.
__________________
55 years of work and all I got was a T-shirt.
|
|
|
06-20-2012, 02:20 PM
|
#5
|
Name: little6cylinder
Title: Everything is "fixable"
Status: Not Here
Join Date: Mar 2011
Location: Colorado
Member`s Gallery
Posts: 1,218
|
Quote:
Originally Posted by RonA
Comfortable to drive? Yep.
|
well.... For a first gen. My obs isn't much better.
__________________
97 Dodge ECLB, Super Street
Built at Granby Truck Shop
|
|
|
06-20-2012, 02:51 PM
|
#6
|
Name: Big Swole
Title: MegaInterceptor
Status: Not Here
Join Date: Jun 2007
Location: Atlanta, GA
Member`s Gallery
Posts: 16,950
|
That's just cool Ron!!
__________________
-HIS
-2017 991.2 Turbo S GT Silver w/ Bordeaux Red / Black
-2023 Camaro 2SS 1LE - 6MT - Sharkskin Metallic
-2006 Honda S2000 - SOS Supercharged - 397 whp - Silverstone Metallic
-2016 RAM 2500 MegaCab Diesel - Silver (Tuned)
-HERS
-2019 718 Boxster S - Miami Blue 6MT, Cobb Tune, Soul, Ohlins,
-2014 958.1 Cayenne S - Umber Metallic / Luxor Beige
-2013 Honda Civic S.i.Coupe - 6MT
|
|
|
06-20-2012, 03:41 PM
|
#7
|
Name: nikeblunt
Title: Too Much Time
Status: Not Here
Join Date: Dec 2009
Location: Atwater,CA
Member`s Gallery
Posts: 380
|
I bet it was a good feeling having something bad ass like that on the road cant wait to see more film
__________________
Gas is for washing parts Cummins all the way
|
|
|
06-20-2012, 03:46 PM
|
#8
|
Name: explosives87
Title: powder monkey
Status: Not Here
Join Date: Aug 2008
Location: Peoples Republic of California
Member`s Gallery
Posts: 953
|
Looks good Ron, on a side note does your truck have a current license plate sticker? It looks like the wrong color for 2013?
__________________
01 QCLB 4x4 Bone stock
Quote of the Day:
"Peace is that brief glorious moment in history when everybody stands around reloading."
Last edited by explosives87; 06-20-2012 at 03:49 PM.
|
|
|
06-20-2012, 08:24 PM
|
#9
|
Name: Hurley
Title: BLAKLUNG
Status: Not Here
Join Date: Apr 2008
Location: Statesville, NC
Member`s Gallery
Posts: 3,698
|
#1 truck sleeper in the world, IMO.
thing's ugly as shiit/
__________________
THIS
IS
COMPD.
95 2500 RCSB 2wd back-halfed and 4-linked
5x14/7mm +100cc/4k/11-blade billet 63/68/.91 T4
539/989
03 RCLB 4x4, SSR
|
|
|
06-21-2012, 12:16 AM
|
#10
|
Name: Smoken Gun
Title: Diaboli parum adiutor.
Status: Not Here
Join Date: Nov 2010
Location: Michigan
Member`s Gallery
Posts: 3,200
|
Quote:
Originally Posted by Hurley
#1 truck sleeper in the world, IMO.
thing's ugly as shiit/
|
X2!
Congrates Ron!
__________________
'18 Ram 3500 Cummins Aisin Laramie Mega. Sold.
'97 Dodge Ram 2500 Cummins Auto Laramie. Sold.
'03 Ford F-250 6.0L Auto. Sold.
|
|
|
08-08-2012, 11:22 AM
|
#11
|
Name: RonA
Title: Too Much Time
Status: Not Here
Join Date: Feb 2008
Location: Liberal ground zero.
Member`s Gallery
Posts: 11,058
|
Just got tne new valve cover back from powder coat. I added 3 additional breathers and will put it on tomorrow after i do a final re-torque and valve adjust. Should have the second FASS and fuel sump installed by the end of the weekend. That will get my fuel pressure gausge working again so i can finally go over half throttle and see what kind of boost levels i am going to see and what's going to break next.
__________________
55 years of work and all I got was a T-shirt.
|
|
|
08-11-2012, 11:34 PM
|
#12
|
Name: 01Grizzly
Title: Diesel Enthusiast
Status: Not Here
Join Date: Mar 2009
Member`s Gallery
Posts: 136
|
What breather are you running?I put two in my valve cover and they leak like a son of a gun. also do they just set in rubber grommets?
__________________
Kyle.
2001 6.? Laramie
2014 6.7 Laramie
|
|
|
08-11-2012, 11:40 PM
|
#13
|
Name: kleann
Title: VP44 pwr
Status: Not Here
Join Date: Aug 2008
Location: Down yonder
Member`s Gallery
Posts: 4,388
|
Quote:
Originally Posted by RonA
Just got tne new valve cover back from powder coat. I added 3 additional breathers and will put it on tomorrow after i do a final re-torque and valve adjust. Should have the second FASS and fuel sump installed by the end of the weekend. That will get my fuel pressure gausge working again so i can finally go over half throttle and see what kind of boost levels i am going to see and what's going to break next.
|
Woah! it'll be white for no longer than a minute.
|
|
|
08-12-2012, 10:19 AM
|
#14
|
Name: 97rada
Title: Too Much Time
Status: Not Here
Join Date: Feb 2008
Member`s Gallery
Posts: 5,410
|
it looks pretty decent to drive actually
__________________
Austin
tow truck- 14-3500 with tuning
toy truck -94 rclb auto- 5.2x with a lot left. Shooting for 4s
Any intelligent fool can make things bigger and more complex...it takes a touch of genius- and alot of courage to move in the opposite direction.
|
|
|
08-12-2012, 10:29 AM
|
#15
|
Name: RonA
Title: Too Much Time
Status: Not Here
Join Date: Feb 2008
Location: Liberal ground zero.
Member`s Gallery
Posts: 11,058
|
Quote:
Originally Posted by 01Grizzly
What breather are you running?I put two in my valve cover and they leak like a son of a gun. also do they just set in rubber grommets?
|
I spot faced the top where the grommet sits, milled the hole a bit undersized, and undercut the far side. They fit the holes pretty tight and I'm hoping they don't leak. If they do I'll thread mill the holes and make screw in breathers with o-rings.
__________________
55 years of work and all I got was a T-shirt.
|
|
|
08-12-2012, 10:40 AM
|
#16
|
Name: Hurley
Title: BLAKLUNG
Status: Not Here
Join Date: Apr 2008
Location: Statesville, NC
Member`s Gallery
Posts: 3,698
|
Quote:
Originally Posted by RonA
I spot faced the top where the grommet sits, milled the hole a bit undersized, and undercut the far side. They fit the holes pretty tight and I'm hoping they don't leak. If they do I'll thread mill the holes and make screw in breathers with o-rings.
|
I'm so jealous of your capabilities.
__________________
THIS
IS
COMPD.
95 2500 RCSB 2wd back-halfed and 4-linked
5x14/7mm +100cc/4k/11-blade billet 63/68/.91 T4
539/989
03 RCLB 4x4, SSR
|
|
|
08-15-2012, 08:23 PM
|
#17
|
Name: RonA
Title: Too Much Time
Status: Not Here
Join Date: Feb 2008
Location: Liberal ground zero.
Member`s Gallery
Posts: 11,058
|
I went over and put a 1/2 tank of fuel in it and tried it out after my 3rd re-torque with no movement, valve adjust, and 50psi of fuel pressure. Holy guacamole this things different. Spools up like towing twins compared to the way the same chargers did on the 5.9. Rolling into it in second without locking the converter breaks loose horribly. Third does the same, as does overdrive. Heck, I may not even need a locking converter any more. What's funny is that instead of breaking loose at the hp peak, it does it 300-400 rpm earlier. I need to put on the overalls and straw hat, put about 10 sacks of steer manure and a bale of hay in the bed, and go out looking for muscle cars. Absolutely the stupidest waste of money and time i was ever associated with, but it runs bloody good.
__________________
55 years of work and all I got was a T-shirt.
|
|
|
08-15-2012, 09:08 PM
|
#18
|
Name: lorendiesel5.9
Title: OG Hunnybadger
Status: Not Here
Join Date: Apr 2009
Location: NE IA or the lower 48
Member`s Gallery
Posts: 3,909
|
I like my overall's.
__________________
Rest in Peace Dex aka BFD99 6/2/12
97 #12vqclbmafia slipping auto
00 Pete 378 12.7 Detroit 10spd
03 Pete 379 6NZ Caterpillar 18spd
|
|
|
08-15-2012, 09:14 PM
|
#19
|
Name: ctdiesel99
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Nov 2008
Location: Lansdale, PA
Member`s Gallery
Posts: 2,789
|
Quote:
Originally Posted by RonA
I went over and put a 1/2 tank of fuel in it and tried it out after my 3rd re-torque with no movement, valve adjust, and 50psi of fuel pressure. Holy guacamole this things different. Spools up like towing twins compared to the way the same chargers did on the 5.9. Rolling into it in second without locking the converter breaks loose horribly. Third does the same, as does overdrive. Heck, I may not even need a locking converter any more. What's funny is that instead of breaking loose at the hp peak, it does it 300-400 rpm earlier. I need to put on the overalls and straw hat, put about 10 sacks of steer manure and a bale of hay in the bed, and go out looking for muscle cars. Absolutely the stupidest waste of money and time i was ever associated with, but it runs bloody good.
|
Such an awesome post!
|
|
|
08-15-2012, 09:15 PM
|
#20
|
Name: bna5017
Title: Too Much Time
Status: Not Here
Join Date: Jan 2008
Location: sandy lake, PA
Member`s Gallery
Posts: 981
|
Quote:
Originally Posted by Hurley
I'm so jealous of your capabilities.
|
That makes two of us.
__________________
1995 12v. reg cab long bed.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 04:22 PM.
|