What HP range... - Competition Diesel.Com

SuperDave4x4 · 09-28-2006, 05:52 PM

Well I'm getting my tranny rebuilt with some billet and a few other goodies from suncoast in about 2-3 weeks and I plan on getting a few BOMBs shortly after the trans go in. With the stuff I already have on the truck plus an S300g and a set of BD stage 5 injectors, what kinda HP should I be looking at? I dynoed once already and that put me at 315hp with a slipping TC.

Has anyone purchased a Reman s300g from www.turbosupply.net before? I talked to a guy over on DTR and he ordered one for 525 and it has supposedly been brought to better specs than a standard one. Oh and it comes with the same warrantee as a new one too.

Also I remember reading that there is a vendor that will install the BD nozzles on a set of stock injectors that he has at his shop and pop test them and then ship them out to you. Does anyone know who that might be?

*Billysgoat* · 09-28-2006, 08:05 PM

With a stage 5 injector you want more work done to the injector than just new nozzles, the fuel gallery in the injector needs to be enlarged as well. The combo you are talking about should be good for about 450HP, there are a lot of variables in there but you should be able to make those kind of numbers.

SuperDave4x4 · 09-29-2006, 11:19 AM

Who would I need to talk to to enlarge the fuel gallery? Can Jeff do that?

paulb · 09-29-2006, 11:39 AM

What type of box do you have? If it is a wire tap box, you will need a bigger turbo, then a S300G, to take advantage of all that fuel.

Paul

gunracer1 · 09-29-2006, 11:50 AM

i didn't see any s300g on there list, do you just have to call them.

*Billysgoat* · 09-29-2006, 09:26 PM

Quote:

Originally Posted by SuperDave4x4

Who would I need to talk to to enlarge the fuel gallery? Can Jeff do that?

Oh Yeah

Ask him about the injectors he sells, they are VERY good units.

SuperDave4x4 · 10-01-2006, 12:36 PM

Yeah, I'll ask him, but I'm sure they are going to be WAY out of my price range.

SuperDave4x4 · 10-01-2006, 12:38 PM

Quote:

Originally Posted by paulb

What type of box do you have? If it is a wire tap box, you will need a bigger turbo, then a S300G, to take advantage of all that fuel.

Paul

I have a Comp box. What would you recommend? A s400 would be to laggy, right? I'm not in the market for a 1200 dollar trubo. I mean I'm about to rebuild my trans so my wallet is going to be a little low.

*TooMuchBoost* · 10-01-2006, 01:17 PM

Quote:

Originally Posted by SuperDave4x4

Yeah, I'll ask him, but I'm sure they are going to be WAY out of my price range.

Not necessarily. Stop in and see him when you have a chance. Even if you pay a little more he'll stand behind what he sells and he's not too far from you either.

09-28-2006, 05:52 PM	#1
SuperDave4x4 Name: SuperDave4x4 Title: popcorn playa Status: Not Here Join Date: Apr 2006 Location: Luling, Louisiana Member`s Gallery Posts: 3,416	What HP range... Well I'm getting my tranny rebuilt with some billet and a few other goodies from suncoast in about 2-3 weeks and I plan on getting a few BOMBs shortly after the trans go in. With the stuff I already have on the truck plus an S300g and a set of BD stage 5 injectors, what kinda HP should I be looking at? I dynoed once already and that put me at 315hp with a slipping TC. Has anyone purchased a Reman s300g from www.turbosupply.net before? I talked to a guy over on DTR and he ordered one for 525 and it has supposedly been brought to better specs than a standard one. Oh and it comes with the same warrantee as a new one too. Also I remember reading that there is a vendor that will install the BD nozzles on a set of stock injectors that he has at his shop and pop test them and then ship them out to you. Does anyone know who that might be? __________________ 2020 Ram 2500 CCLB 4x4 (Sold)1999 Dodge Ram 2500 4x4 24v CTD Ext. Cab- 01' motor w/ orings, .020 gasket, Garmon/SunCoast, Drag comp, 150hp EDMs, 57/72 twins, AD150, 20" Hoss, Proxes STII, Thuren/Carli, etc Member #41

09-29-2006, 11:19 AM	#3
SuperDave4x4 Name: SuperDave4x4 Title: popcorn playa Status: Not Here Join Date: Apr 2006 Location: Luling, Louisiana Member`s Gallery Posts: 3,416	Who would I need to talk to to enlarge the fuel gallery? Can Jeff do that? __________________ 2020 Ram 2500 CCLB 4x4 (Sold)1999 Dodge Ram 2500 4x4 24v CTD Ext. Cab- 01' motor w/ orings, .020 gasket, Garmon/SunCoast, Drag comp, 150hp EDMs, 57/72 twins, AD150, 20" Hoss, Proxes STII, Thuren/Carli, etc Member #41

09-29-2006, 11:39 AM	#4
paulb Name: paulb Title: Too Much Time Status: Not Here Join Date: Jul 2006 Location: Klamath Falls, OR Member`s Gallery Posts: 1,673	What type of box do you have? If it is a wire tap box, you will need a bigger turbo, then a S300G, to take advantage of all that fuel. Paul __________________ 02 4x4 Auto Mach 6+'s, Drag Comp,Source Automotive Twins, Ultimate Transmission 05 2500 4x4 Auto 3.73 BBI 4's, Smarty Touch, Source Automotive Twins, F1 springs and Cam, Opie's bypass system, Mitusa, PPE Dual Fueler, Ultimate Transmission, Opie shafts,Isspro gauges

10-01-2006, 12:36 PM	#7
SuperDave4x4 Name: SuperDave4x4 Title: popcorn playa Status: Not Here Join Date: Apr 2006 Location: Luling, Louisiana Member`s Gallery Posts: 3,416	Yeah, I'll ask him, but I'm sure they are going to be WAY out of my price range. __________________ 2020 Ram 2500 CCLB 4x4 (Sold)1999 Dodge Ram 2500 4x4 24v CTD Ext. Cab- 01' motor w/ orings, .020 gasket, Garmon/SunCoast, Drag comp, 150hp EDMs, 57/72 twins, AD150, 20" Hoss, Proxes STII, Thuren/Carli, etc Member #41

09-29-2006, 11:50 AM	#5
gunracer1 Name: gunracer1 Title: Too Much Time Status: Not Here Join Date: Jun 2006 Location: just north of lake weatherford, tx Member`s Gallery Posts: 2,068	i didn't see any s300g on there list, do you just have to call them.