Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > The Starting Line > Sled Pulling
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Sled Pulling From Street to Pro-Mod, get your Sled Pulling fix here!

Closed Thread
 
Thread Tools
Old 05-19-2018, 05:47 PM   #1
ryanss22
 
ryanss22's Avatar

Name: ryanss22
Title: Too Much Time
Status: Not Here
Join Date: Jul 2012
Location: small town central ny
Member`s Gallery
Posts: 736
Rollor rocker valve adj

I just had a rollor rocker setup (uses stock pedistals) put in my pull truck (12v cummins) stock ratio.. my question is how do you go about checking valve lash (where to check with feeler gauges) and at what specs are they supposed to be with this setup? Thank you ahead of time for any help.
__________________
96 fummins 12V puller, few other goodies

BUILT NOT BOUGHT!!!!to
 
Old 05-19-2018, 07:03 PM   #2
prostockpuller
 
prostockpuller's Avatar

Name: prostockpuller
Title: Too Much Time
Status: Not Here
Join Date: Sep 2012
Location: Orrville, oh
Member`s Gallery
Posts: 532
This might help: the feeler gauge goes between the valve stem and the rocker tip.....and if you have to ask that particular part of the question...I would suggest you get some help your 1st time doing this.

with #1 piston TDC on compression stroke (#6 rocking) you can set:

Intakes 1-2-4
exhaust 1-3-5
set intakes to .010" (or the cam's recommended lash)
set exhaust to .020" (or the cam's recommended lash)

find #6 TDC compression. mark crank damper and gear cover turn engine over 1 rev. you verify this when you see #1 valves go into overlap (rocking).

now you can set rest....

intake 3-5-6
exhaust 2-4-6

How To Set Valve Lash On A Diesel Engine - YouTube

Last edited by prostockpuller; 05-19-2018 at 07:04 PM.
 
Old 05-19-2018, 07:13 PM   #3
ryanss22
 
ryanss22's Avatar

Name: ryanss22
Title: Too Much Time
Status: Not Here
Join Date: Jul 2012
Location: small town central ny
Member`s Gallery
Posts: 736
I've done them on a stock setup. But wasent sure where the feeler gauge goes on a rollor setup. So the feeler gauge goes between the bottom of rollor and the valve stem ? Do you still use the .10 and .20?
__________________
96 fummins 12V puller, few other goodies

BUILT NOT BOUGHT!!!!to

Last edited by ryanss22; 05-19-2018 at 07:14 PM.
 
Old 05-19-2018, 07:31 PM   #4
prostockpuller
 
prostockpuller's Avatar

Name: prostockpuller
Title: Too Much Time
Status: Not Here
Join Date: Sep 2012
Location: Orrville, oh
Member`s Gallery
Posts: 532
yes....if cam is stock...
 
Old 05-19-2018, 07:48 PM   #5
ryanss22
 
ryanss22's Avatar

Name: ryanss22
Title: Too Much Time
Status: Not Here
Join Date: Jul 2012
Location: small town central ny
Member`s Gallery
Posts: 736
PM sent
__________________
96 fummins 12V puller, few other goodies

BUILT NOT BOUGHT!!!!to
 
Old 05-21-2018, 08:22 PM   #6
ryanss22
 
ryanss22's Avatar

Name: ryanss22
Title: Too Much Time
Status: Not Here
Join Date: Jul 2012
Location: small town central ny
Member`s Gallery
Posts: 736
Far from stock cam
__________________
96 fummins 12V puller, few other goodies

BUILT NOT BOUGHT!!!!to
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:23 PM.

 


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com