Translate this injector flow for me

Big Swole

Big Swole

MegaInterceptor
Joined
Jun 28, 2007
Messages
16,950
04.5+ 5 hole tips

At 1600 bar

Average 216 mm3/stoke

Can anyone tell me what this equates to in HP, LPH, LPM, or % Over stock?
 
IIRC, an '03 305hp engine is 114mm^3/stroke. Should say on the engine data tag what stock was.
 
I wanna say 85% over is about a "175" but I've been driving for 2 days and my brain may just be fried.
 
I'm assuming you are using 160MPa - 1700uS for your mm³ value? For reference;

Mach 4.5 - 207mm³ ~ 100% over stock 2.07LPM.

Mach 5 - 220mm³ ~ 150% over stock 2.67LPM.
 
The value you posted is higher than the 100% over stock value...
 
Smokem said:
The value you posted is higher than the 100% over stock value...
Click to expand...

blackdieselram said:
^^ what he said. mine are 100% over and only flow around 207 off the top of my head.
Click to expand...


Ok Kewl!

The 216-217 is just the average i'm seeing across the 6..

3 Highest looks like 220,219,218
3 Lowest are like 212, 213, 215

Picked up 10+ % across the board with the repairs on the 5 decent ones..
 
You must log in or register to reply here.
Back
Top