Dockboy
Comps BFF
Drag or Puller rolling chassis ready for Cummins 2000 F250 4x4
2000 Ford F250 Super Cab 4x4 rolling chassis ready for Cummins and tranny.
Set up as dedicated drag truck now but would be a good platform for dedicated puller also. Drop in a Cummins/4r100/PCS combo and go racing in SuperStreet/ProStreet. It's strictly a race truck not a show or street truck. Paint is good for 12 years old. Scratches on fenders from working on engine. Truck has been as fast as 10.06 @ 135 with an 1100 hp Cummins in it.
2000 F250 Super Cab 4x4 8' bed 206k mi with clean title
Custom 6 point CM roll bar completely inside cab with swing-out door bars legal to 10.00
Corbeau race seat with adjustable slide bracket
RCI 5 point cam lock harness (negotiable)
Complete interior dash and door panels, power windows/locks/mirrors, no radio
SPA Techniques 0-132 boost, egt, fuel press., oil press, trans temp, and rear end temp gauges
Autometer analog 0-60 boost gauge
AC, condenser, and Heater box removed
Ford radiator and all aluminum intercooler with Flex-a-lite fans
2 stage nitrous solenoids with Nitrous Express progressive controller
15 lb. bottle bracket and heater mounted on passenger side frame rail
4" exhaust from downpipe to bed with 5" chrome single stack
Power center in engine bay with bed mounted batteries
Master Battery cut-off
16 gal. fuel cell mounted in bed
Manual shift NP 271 transfer case
Rear driveshaft shortened for Cummins/4r100 swap with new u-joints
3 driveshaft loops (1 front, 2 rear)
Adjustable limiting straps on front axle
Caltracs on rear with 2 springs removed from spring pack
New Rancho 9000 xl adjustable rear shocks
Yukon Race Powr-lok LS Front Dana 50 differential
Ford Sterling 10.5 LS Rear differential with shimmed clutches and Mag Hy-tech cover
New rear brake calipers (both sides)
1 set 18x9 Moto Metal wheels with 305/45/18 Mickey Thompson ET Street II Drag Radials (50% left)
EXTRA PARTS
1 set 16x10 ION wheels with 12x16 M&H Nostalgia Drag Slicks (90% left)
1 set oem 16x8 alloy wheels (no tires)
1 spare tire and rim
extra set of rear springs with Caltrac bushings
Complete Dana 60 front axle assembly ready to install
2" receiver hitch
stock 40/20/04 power cloth front seats and rear seat
Many more misc parts.
Videos
http://www.youtube.com/watch?v=ZbHTW_Q0rsg
http://www.youtube.com/watch?v=vaGCrhpEbhg
http://www.youtube.com/watch?v=_aB1v4hBJbc
http://www.youtube.com/watch?v=VuKpX_Bb760
Pictures here: Engine/tranny/PCS not included in sale
Webshots Rides offers thousands of the best car wallpapers.
Located in Cecil County Maryland
$12,000 for roller and all extra parts.
2000 Ford F250 Super Cab 4x4 rolling chassis ready for Cummins and tranny.
Set up as dedicated drag truck now but would be a good platform for dedicated puller also. Drop in a Cummins/4r100/PCS combo and go racing in SuperStreet/ProStreet. It's strictly a race truck not a show or street truck. Paint is good for 12 years old. Scratches on fenders from working on engine. Truck has been as fast as 10.06 @ 135 with an 1100 hp Cummins in it.
2000 F250 Super Cab 4x4 8' bed 206k mi with clean title
Custom 6 point CM roll bar completely inside cab with swing-out door bars legal to 10.00
Corbeau race seat with adjustable slide bracket
RCI 5 point cam lock harness (negotiable)
Complete interior dash and door panels, power windows/locks/mirrors, no radio
SPA Techniques 0-132 boost, egt, fuel press., oil press, trans temp, and rear end temp gauges
Autometer analog 0-60 boost gauge
AC, condenser, and Heater box removed
Ford radiator and all aluminum intercooler with Flex-a-lite fans
2 stage nitrous solenoids with Nitrous Express progressive controller
15 lb. bottle bracket and heater mounted on passenger side frame rail
4" exhaust from downpipe to bed with 5" chrome single stack
Power center in engine bay with bed mounted batteries
Master Battery cut-off
16 gal. fuel cell mounted in bed
Manual shift NP 271 transfer case
Rear driveshaft shortened for Cummins/4r100 swap with new u-joints
3 driveshaft loops (1 front, 2 rear)
Adjustable limiting straps on front axle
Caltracs on rear with 2 springs removed from spring pack
New Rancho 9000 xl adjustable rear shocks
Yukon Race Powr-lok LS Front Dana 50 differential
Ford Sterling 10.5 LS Rear differential with shimmed clutches and Mag Hy-tech cover
New rear brake calipers (both sides)
1 set 18x9 Moto Metal wheels with 305/45/18 Mickey Thompson ET Street II Drag Radials (50% left)
EXTRA PARTS
1 set 16x10 ION wheels with 12x16 M&H Nostalgia Drag Slicks (90% left)
1 set oem 16x8 alloy wheels (no tires)
1 spare tire and rim
extra set of rear springs with Caltrac bushings
Complete Dana 60 front axle assembly ready to install
2" receiver hitch
stock 40/20/04 power cloth front seats and rear seat
Many more misc parts.
Videos
http://www.youtube.com/watch?v=ZbHTW_Q0rsg
http://www.youtube.com/watch?v=vaGCrhpEbhg
http://www.youtube.com/watch?v=_aB1v4hBJbc
http://www.youtube.com/watch?v=VuKpX_Bb760
Pictures here: Engine/tranny/PCS not included in sale
Webshots Rides offers thousands of the best car wallpapers.
Located in Cecil County Maryland
$12,000 for roller and all extra parts.
