2003 Dodge Regular cab 900hp (New Engine) - Competition Diesel.Com

Bosshawg600 · 04-24-2016, 02:30 PM

2003 Dodge 2500 Regular Cab SLT interior

JVC Radio, JBL Speakers, New Dash, DiProcol Guages
SRT Hood and Front bumper, 42" light bar and 4" pods in the fogs

Engine:
Full Rebuild 4/2016
.20 Over Re-bore, Balanced Bottom End, New Valve Job and Valve Guides, Sleeved and Decked Block
Keating Machine Fire Rings
Hamilton 181/214 Cam
Hamilton Extreme Duty Push Rods
Crower Valve Springs
ATS 3 pc 2nd Gen Manifold
66/80 Twin Turbos (Rebuilt 3/16)
PPE Dual CP3's (LBZ top, High Flow 6.7L pump bottom)
200% Over Injectors (New 12/15, 100 miles on them)
Banks Intake w/ Boost tubes and BANKS Intercooler

Trans:
Monster Pump Mike Full Billet Trans
2pc. Billet Converter
Manual Valve Body w TCI Shifter

Drivetrain/Suspension:
New Driveshafts, Ujoints, Balljoints and Wheel bearings
U Joint Sheilds, Cal Trac's
Carli Leveling kit (3" Lift) with custom Top Gunz short arms
Carli Steering Stabilizer
Carli Trac Bar
20x12 Fuel Maverick Rims w/ 35x12.5R20 Toyo MT's
5" Full Exhaust and 8" stack

Over $10,000 in recipts in just the last few months!!! Tons of new parts and lots of upgrades. 197K miles on the body, Southern Truck with ZERO rust. Only bad with the truck is the clear coat is beginning to peel and has a rebuilt title but was very minor over 150K miles ago. Only selling to make a down payment for our family farm. NO TRADES and WILL NOT PART OUT!!

29,000 OBO. Feel free to text or call with any questions, 574-870-3841

For More Pictures: http://tippecanoe.craigslist.org/cto/5526482604.html

squizz · 04-25-2016, 06:32 AM

Damn i hate reg cabs, but thats a sweet ass truck you have!! Bet its fun to drive too!!!

johnfak · 04-25-2016, 06:34 AM

Nice.

Sent from my SM-N900V using Tapatalk

RockinRam96 · 04-25-2016, 11:13 AM

4 wheel drive?

What rods are in the engine? Factory CR rods?

Bosshawg600 · 04-25-2016, 12:49 PM

Quote:

Originally Posted by squizz

Damn i hate reg cabs, but thats a sweet ass truck you have!! Bet its fun to drive too!!!

Thanks! It is, and I love the truck, but having the oppertunity to buy our family farm means the toys have to go......

Quote:

Originally Posted by RockinRam96

4 wheel drive?

What rods are in the engine? Factory CR rods?

it is 4wd, and its factory rods. Machine shop went over them and they were fine. I didnt plan on doing any big time HP numbers or hot rodding the truck, just a fun street truck/daily driver, so didnt put in aftermarket rods. They did go ahead and balance the bottom end while it was out.

Broaner · 04-25-2016, 02:11 PM

So gorgeous! Just hold this for about 3 years for me? JK GLWS!

Devilman · 04-25-2016, 02:49 PM

I've already told you don't sell it, you're gonna regret it!! Lol it'd be in my shop if the boss lady would allow it.....GLWS bud, truck looks awesome!

Bosshawg600 · 04-25-2016, 05:11 PM

Quote:

Originally Posted by Broaner

So gorgeous! Just hold this for about 3 years for me? JK GLWS!

If it doesnt sell, it doent sell hahaha!!!!

Quote:

Originally Posted by Devilman

I've already told you don't sell it, you're gonna regret it!! Lol it'd be in my shop if the boss lady would allow it.....GLWS bud, truck looks awesome!

Id love to keep it, especially after all Ive put into it.... but farm ground isnt cheap and I need as much cash as I can get at this point!

Bosshawg600 · 04-25-2016, 06:22 PM

Quote:

Originally Posted by blackmega3500

With all the govt handout to farmers these days, hell yeah it's gonna be some coin to invest.

Good buddy of mine and his family is a Case dealer in south Texas that has 4 locations....

Needless to say they're not hurting!

Not to mention 716 acres in the town south of us went for almost 12K an Acre!!!! Tyson Food (Rold Gold) bought it all up before the auction started.....

BTW, This new motor HAS NOT been on the dyno yet... Old motor with stock cam and much smaller injectors (125% overs) made 847hp

cottondoc · 04-25-2016, 06:31 PM

Quote:

Originally Posted by blackmega3500

With all the govt handout to farmers these days, hell yeah it's gonna be some coin to invest.

Good buddy of mine and his family is a Case dealer in south Texas that has 4 locations....

Needless to say they're not hurting!

Handouts to farmers?? Really? Why? For all their voting power? They make up all of about 1% of the voting population or less. The handouts farmers get in the USA are to provide the highest quality food and fiber at the best prices possible of any country in the world. What country has better and cheaper food than the US? Either way farming is a totally free market business. If it's so profitable, just go rent some land and lease some equipment and get after! Make that easy money!! Ha!!! Handouts are definitely a problem these days in his country but it ain't the handouts to the farmers causing the problems.

Sorry for the derail. Just my

.

cottondoc · 04-25-2016, 07:51 PM

Quote:

Originally Posted by blackmega3500

I can speak from a family experience. ....

Uncle in Iowa grew corn, gov't came in a offered $$$$$ to not farm for a year and they'd even make land improvements (built him a shop).

Why you ask.... to manipulate the ethanol industry.

So like any smart business man you diversify. .... what'd he do that year.... raised pigs.

This happens all the time! Its just hush hush, and all about where your located.

Yeah I know from experience too. My dad was a cotton, corn and peanut farmer his entire life in south west Georgia until he retired at 72 years old. I didn't say farmers didn't get subsidies but like I said, in the end it's for the good of the American people and for a cheap, stable food supply, not to purposely make farmers rich. Some farmers make a really good living, even get rich, but most of them work pretty hard too and gamble with everything they have every year they farm. Again, it's a free market, and anybody willing to take that gamble and work that hard can do it whenever they get ready. There's plenty of businesses and markets the government gives handouts to. Farming isn't the only one. That's just the one everybody likes to bring up when complaining about government handouts. Again sorry for the derail and I'm getting off my soapbox this time.

Bosshawg600 · 04-27-2016, 05:52 PM

Bump, Ready to work a deal!!!!

Bosshawg600 · 04-29-2016, 10:35 PM

Pains me to do it, but SLASHED THE PRICE!

25000 w/17x9 DC-II's with brand new MT's that have never seen the road

27000 as it sits

Kronk · 05-01-2016, 02:44 PM

Bet this is fun to drive. Glws

If you decide to part with trans setup I know of someone looking for a monster mike setup

Bosshawg600 · 05-01-2016, 04:48 PM

Quote:

Originally Posted by Kronk

Bet this is fun to drive. Glws

If you decide to part with trans setup I know of someone looking for a monster mike setup

Oh it is! Gravel and wet roads are a no go HAHAHA! But have a guy coming this week to take a look at it, and we will see what happens.....but Im not looking to part out. If you would have gotten to me a few months ago, I would have cut a heck of a deal on it!

Bosshawg600 · 05-04-2016, 03:44 PM

BUMP!!!

With all this UCC stuff going on, someone has to be getting the bug for a fresh build!!!

Bosshawg600 · 05-07-2016, 11:26 PM

Bump again..... Really needing to sell!

Bosshawg600 · 05-13-2016, 05:53 AM

Pre-weekend Bump!

Bosshawg600 · 05-18-2016, 02:49 PM

Priced too high or something???? Really looking to make someone a deal!!!!

Bosshawg600 · 05-24-2016, 06:41 PM

Bump once again, I can lower the price but will probably have to pull some things off...... but willing to deal!

04-24-2016, 02:30 PM	#1
Bosshawg600 Name: Bosshawg600 Title: PDP.com FireFighter Status: Not Here Join Date: Aug 2006 Location: Monticello,In Member`s Gallery Posts: 3,651	2003 Dodge Regular cab 900hp (New Engine) 2003 Dodge 2500 Regular Cab SLT interior JVC Radio, JBL Speakers, New Dash, DiProcol Guages SRT Hood and Front bumper, 42" light bar and 4" pods in the fogs Engine: Full Rebuild 4/2016 .20 Over Re-bore, Balanced Bottom End, New Valve Job and Valve Guides, Sleeved and Decked Block Keating Machine Fire Rings Hamilton 181/214 Cam Hamilton Extreme Duty Push Rods Crower Valve Springs ATS 3 pc 2nd Gen Manifold 66/80 Twin Turbos (Rebuilt 3/16) PPE Dual CP3's (LBZ top, High Flow 6.7L pump bottom) 200% Over Injectors (New 12/15, 100 miles on them) Banks Intake w/ Boost tubes and BANKS Intercooler Trans: Monster Pump Mike Full Billet Trans 2pc. Billet Converter Manual Valve Body w TCI Shifter Drivetrain/Suspension: New Driveshafts, Ujoints, Balljoints and Wheel bearings U Joint Sheilds, Cal Trac's Carli Leveling kit (3" Lift) with custom Top Gunz short arms Carli Steering Stabilizer Carli Trac Bar 20x12 Fuel Maverick Rims w/ 35x12.5R20 Toyo MT's 5" Full Exhaust and 8" stack Over $10,000 in recipts in just the last few months!!! Tons of new parts and lots of upgrades. 197K miles on the body, Southern Truck with ZERO rust. Only bad with the truck is the clear coat is beginning to peel and has a rebuilt title but was very minor over 150K miles ago. Only selling to make a down payment for our family farm. NO TRADES and WILL NOT PART OUT!! 29,000 OBO. Feel free to text or call with any questions, 574-870-3841 For More Pictures: http://tippecanoe.craigslist.org/cto/5526482604.html __________________ 2011 Ram Mega, Because my old bones need Comfort!

04-25-2016, 06:34 AM	#3
johnfak Name: johnfak Title: Too Much Time Status: Not Here Join Date: May 2011 Member`s Gallery Posts: 253	Nice. Sent from my SM-N900V using Tapatalk __________________ 2000 Dodge Ram Monster Mike Billet Trans 12mm NE ppump 66 ED billet single

04-25-2016, 11:13 AM	#4
RockinRam96 Name: RockinRam96 Title: Too Much Time Status: Not Here Join Date: Sep 2011 Location: Shortsville, NY Member`s Gallery Posts: 2,700	4 wheel drive? What rods are in the engine? Factory CR rods? __________________ 05 Jeep Liberty CRD 11 Dodge 1986 Freightliner Cat 425

04-25-2016, 02:11 PM	#6
Broaner Name: Broaner Title: Been There n Broke That Status: Not Here Join Date: Apr 2012 Location: Madison, WI Member`s Gallery Posts: 744	So gorgeous! Just hold this for about 3 years for me? JK GLWS! __________________ 05.5 QCSB Shotpeened NV5600 - 994hp/1650tq, 6.7, Wagler Rods, QSB Pistons, 625's, Oversized Valves, ZZFab, P&P, 150%, Dual CP3, 69/73/1.0 & 82/96/1.32 Street Triple, 35's, Trutrac, Carli, MM3 from Gordon, 1100hp

04-25-2016, 02:49 PM	#7
Devilman Name: Devilman Title: Diesel Enthusiast Status: Not Here Join Date: Jan 2009 Member`s Gallery Posts: 183	I've already told you don't sell it, you're gonna regret it!! Lol it'd be in my shop if the boss lady would allow it.....GLWS bud, truck looks awesome! __________________ 2015 MegaCab Laramie Sport, Rivey tuned, Carli, 4.56s, 38" Toyos, S&S 150%, 12mm, 468, 48swap 1996 Ford F350 CCSB 4x4, enforcer, comp 3, big fuel, big air 2007 MegaCab Laramie Sport, Rivey tuned, Carli, 363/475, S&S 100%, 12mm

04-25-2016, 06:32 AM	#2
squizz Name: squizz Title: Too Much Time Status: Not Here Join Date: Feb 2009 Member`s Gallery Posts: 1,685	Damn i hate reg cabs, but thats a sweet ass truck you have!! Bet its fun to drive too!!!

04-27-2016, 05:52 PM	#12
Bosshawg600 Name: Bosshawg600 Title: PDP.com FireFighter Status: Not Here Join Date: Aug 2006 Location: Monticello,In Member`s Gallery Posts: 3,651	Bump, Ready to work a deal!!!! __________________ 2011 Ram Mega, Because my old bones need Comfort!

04-29-2016, 10:35 PM	#13
Bosshawg600 Name: Bosshawg600 Title: PDP.com FireFighter Status: Not Here Join Date: Aug 2006 Location: Monticello,In Member`s Gallery Posts: 3,651	Pains me to do it, but SLASHED THE PRICE! 25000 w/17x9 DC-II's with brand new MT's that have never seen the road 27000 as it sits __________________ 2011 Ram Mega, Because my old bones need Comfort!

05-01-2016, 02:44 PM	#14
Kronk Name: Kronk Title: Too Much Time Status: Not Here Join Date: Apr 2011 Member`s Gallery Posts: 1,106	Bet this is fun to drive. Glws If you decide to part with trans setup I know of someone looking for a monster mike setup __________________ 08 QCSB 6.7/Power Driven Diesel 48RE

05-04-2016, 03:44 PM	#16
Bosshawg600 Name: Bosshawg600 Title: PDP.com FireFighter Status: Not Here Join Date: Aug 2006 Location: Monticello,In Member`s Gallery Posts: 3,651	BUMP!!! With all this UCC stuff going on, someone has to be getting the bug for a fresh build!!! __________________ 2011 Ram Mega, Because my old bones need Comfort!

05-07-2016, 11:26 PM	#17
Bosshawg600 Name: Bosshawg600 Title: PDP.com FireFighter Status: Not Here Join Date: Aug 2006 Location: Monticello,In Member`s Gallery Posts: 3,651	Bump again..... Really needing to sell! __________________ 2011 Ram Mega, Because my old bones need Comfort!

05-13-2016, 05:53 AM	#18
Bosshawg600 Name: Bosshawg600 Title: PDP.com FireFighter Status: Not Here Join Date: Aug 2006 Location: Monticello,In Member`s Gallery Posts: 3,651	Pre-weekend Bump! __________________ 2011 Ram Mega, Because my old bones need Comfort!

05-18-2016, 02:49 PM	#19
Bosshawg600 Name: Bosshawg600 Title: PDP.com FireFighter Status: Not Here Join Date: Aug 2006 Location: Monticello,In Member`s Gallery Posts: 3,651	Priced too high or something???? Really looking to make someone a deal!!!! __________________ 2011 Ram Mega, Because my old bones need Comfort!

05-24-2016, 06:41 PM	#20
Bosshawg600 Name: Bosshawg600 Title: PDP.com FireFighter Status: Not Here Join Date: Aug 2006 Location: Monticello,In Member`s Gallery Posts: 3,651	Bump once again, I can lower the price but will probably have to pull some things off...... but willing to deal! __________________ 2011 Ram Mega, Because my old bones need Comfort!