Recent content by Alexp12valve

ive been reading numerous fourms about builds and how to get to certain numbers but I feel theres a easier way to do this. Whats the simplest way to build a clean daily/street 650-700hp 12 valve. I have a 160 pump, trucks torn apart going in a 02 frame, need help with what to decide on running...

So ive read numerous things about swapping it and making the new cluster work and keeping the 24v harness.. I'm going to swap my 95 dash into a 02 and run my entire 12 valve harness. That being said, will i have to change the master cylinder and my power steering pump because the 02 is...

I'm swapping out my auto to a 5 or six speed. Can anyone list EXACTLY what I need to make this work. I am also looking for a cab for my truck and would prefer a standard cab so I don't have to cut holes. My trucks a club cab. Sorry for blowing the forums up want to get my build on its way. Will...

So I took my pump off and was going to get a new one, decided to keep it etc etc. I took the gear off and all that good stuff never marked it cause I was going to get a new one and turned the motor over with the pump off. My question is, will my pump timing be off from the motor and there a...

Took my Cummins apart and was gonna buy a new pump but I didn't. My motors been turned over so the pump and motor are off. How do you time it? Or what do you do haha I'm a beginner here on motors so just curious what to do

Thinking about swaping my eclb into a ecsb. This guys selling a 1500 for 400 bucks, can i just axle swap my 3/4 tons onto it and run it? Or do i need to strengthen the frame also would emissions or anything be different or all the same?

I know it might sound dumb but these directions are ****. I have the whole thing set up and cant figure out how to put it onto factory lift pump. The fuel line coming off the lp goes to the filter which brings it to the injection pump. The picutre of the dirrctions suck just not sure where to...

So imm doing my valve lash in my 95 auto. I did exhaust on cyl 1 and 3 when cyl one is at tdc. The problem is you have to do 1,3,5 and the number five exhaust valve seems to not loosen up no matter what i do. Need help asap lemme know what you got for me. I hope its not a sticking valve, all...

So i was driving causally and noticed my oil light come on a off thought it was off looked at oil pressure and it would drop to 0 then go back to normal levels. Truck ran fine egts fine. Pulled over and shut truck off, oil was coming from passanger side and was all over the intake and turbo and...

Alright, So i've been reading up about this blowby problem that has been occuring to me and it seems like it isn't so much the valves out of wack anymore. I recently read a fourm about the turbo being the problem. The kid said he took his return line off the turbo and the haze out his blowby...

Okay so i've been reading up on valve lash because my truck has started smoking out the blowby tube and it's not losing oil but i notice a definite power loss. I've read about doing the damper adjusting or buying the barring tool. My question is everyones talking about using the alternator...

Just joined this forum out of Connecticut, hoping to learn some things about my 12 valve. got a 95 eclb cumapart. Glad to be a part of this fourm

I'm new to this forum just got a few questions i'm hoping i can get an answer to. I got a 95 eclb 12 valve 0 fuel plate and the afc slid forward. I recently just did a lift pump in my truck (stock replacement) and it starts much better now. Recently my truck started to haze white smoke at idle...