Recent content by TDX

I'm trying to identify what exactly a certain edge box is. Part number XEJD3000 Also has 20210 in it. It's currently on a 2003 common rail. Anyone know? The part number starting with the "X" is what I can't seem to find online. Is this a hot box or extreme box? Other that the "X" the EDJ3000 is...

Can anyone help me to identify these turbo's. They are Garrett and tag says 8927200 Qe 125L On the housing it says M24 and .75 ar It is a large foot. I can have them for free.

My friends 06 shows -50 Celsius on our coolant temp sensor. Would this be the culprit of the bad mileage. We are going to check harness. My question is is this the ECM default temp. Or do we have the 5 volt shorting to ground somewhere. ???

Just interested if anyone has scaled a 5.9 with only the bare minimum. No fan, alternator, p/s pump, vacuum pump, Nothing. Just Race trim. Single turbo or twin?

Did anyone else spot this. Looks like it's for sale. Check out there web page.

i am looking for the valve diameter and stem lenght and diameter of the 12 valve, exhaust valve. Anyone who has one laying around can you let me know please Thanks.

what year is the best to hotrod for the common rail. any year to avoid for crank, block, rods, pistons. I am looking at an 06 engine for a new project.

Does any one know if the copper washers under the injector need to be changed to a thicker set to keep the spray pattern in the right place in the piston bowl. i am in the final stages of a common rail head swap on my 2001 vp truck and was wondering if it is important or does it not change...

Here is an interesting question. I see a lot race cars running larger turbos that have the compressor inlet bushed down to the size that hey need to pass tech inspection for there class of racing. i am wondering if i could insert a bushing in the compressor inlet of my silver bullet 66 to a 62...

Good afternoon all, I am going to be decking my cylinder head and i was suprised that cummins does not have a oversize gasket for my application. I figured lets say i cut 5 to 10 thous. would i not want the same over size to keep compression ratio. Or is the cc,s of the valve recess area so...

Can anyone tell me what year this cylinder head casting number would have come from. #3965999 common rail head

Can anyone please tell me if a 06 common rail head will fit on a 2001 24 valve. Why i ask is i was hogging out my stock head and found water jacket. I have a line on a head with 100,000 km on it for cheap. but need to know to jump on the sale.

Can anyone please tell me if a 06 common rail head will fit on a 2001 24 valve. Why i ask is i was hogging out my stock head and found water jacket. I have a line on a head with 100,000 km on it for cheap. but need to know to jump on the sale.

Can anyone please tell me if a 06 common rail head will fit on a 2001 24 valve. Why i ask is i was hogging out my stock head and found water jacket. I have a line on a head with 100,000 km on it for cheap. but need to know to jump on the sale.

Just wondering if anyone has any info on the Hamilton cylinder head or the rumor about Indy Cylinder Head having something in the works.