Recent content by WideOpenThrottl

I am pretty sure I have a cooked ECM on 2003 4x4 NV5600. 6 speed 305 hp from hooking the jumper cables up backwards, anyone know what would fit this? Is the yr specific or what options matter, manual 4x4 etc? Thanks Numbers on ECM PN 3963994 SN 50067 DC 11/19/2002 ESN 56985704 E/C 590069 02...

I am pretty sure I have a cooked ECM on 2003 4x4 NV5600. 6 speed 305 hp from hooking the jumper cables up backwards, anyone know what would fit this? Is the yr specific or what options matter, manual 4x4 etc? Thanks Numbers on ECM PN 3963994 SN 50067 DC 11/19/2002 ESN 56985704 E/C 590069 02...

I was driving across a field the other night. Came out the next morning to a completely dead battery. Tried jump starting it, in the process my buddy hooked up the battery cables backwards for a few seconds and the horn and wipers started going off. Just bought 2new batteries but now just...

I have a complete running 1999 24v with a cracked 53 block. The motor has 212k on it, but the vp44 has been replaced at one point, not sure when, but it has a re-man sticker on it. The block is cracked below the turbo. The engine is complete with everything, the only thing I took off was the...

I have a 99 manual that has had the 53 block crack real bad. I purchased a wrecked 2001.5 auto to pull the motor from. Do I need to swap engine wiring harnesses and ECM? I have a edge juice/attitude on the 99 that I would like to continue to use with the 01 motor. Any info is appreciated...

The engine is an 05 that threw a rod bearing, ran fine up until that point, block is bad. $250 head $250 turbo $400 for complete injector set $400 for injection pump with rail Everything is best offer also, truck had 250k on it when the engine was pulled. Buyer pays shipping, if you would...

We have a 2005 pickup that spun a bearing and threw the rod last year. We recently picked up a used motor from member on CompD. The install was finished last night and everything looks to be in order. We have fuel presure to the filter and the rail, it cranks over nice, but no sputtering, no...

Do the large (11-14L) engines run variables? If so does anybody happen to know model numbers? Thanks, Tim.

Need a t-case for a 2000 dodge cummins to fit an auto. Thanks, Tim.

I have a 2003 quad cab LB 5.9 cummins manual trans. Vin 3D7KU28C53G763063 The blinkers do not work, one brake light does not work and only one headlight works. The fixtures are all ok. I took it up town to have it diagnosed, They said I need a Power Distribution Center Module (fuse box by...

I just put my rebuilt motor and manual tranny back in the pickup, but there seems to be a bit of a problem. When driving at various speeds the T Case starts to grind real bad like it is trying to go into 4x4, so you I try pushing it forward into 2wd, nothing, pull it into 4wd while still...

Axles out of a 1994 2500 Cummins with 5spd. 3.54 gears, front axle is complete out of the pickup, all the steering components, and brakes, the rear is also complete with the leaf springs and brakes. They are a friend of mine, his contact info Mike, 651-308-9722. $1300 obo for the set. You...

Well I recently picked up a VGT take off from a 6.7L 07 Cummins, not sure what it is worth, I would try playing with it on my 12v build but I already have purchased my silver 62. Make an offer?

This is a new BD Super Max turbo, just the turbo, does not come with clamps or oil feed or drain lines, the kit sells for $2300, save $500, this has never been bolted up. $1800, 651-261-5878...

P7100 out of a 94 manual, I was told it has a 4k gsk, laser cuts and a fuel plate, but if you want I can check to see if it has laser cuts, I have the socket to do so, but odds are the oring will tear, I can also check to see what fuel plate it has. $700, PM or call 651-261-5878 The motor is...