Search results

I know this is wrong section but need asap!!!Needing a pair of 94-02 Dana 80 bottom u bolt plates? Need to be for 4" axle tube and they saddle the bottom of axle tube!! Pm me if you can help me out!!!

Needing a pair of 94-02 Dana 80 bottom u bolt plates? Need to be for 4" axle tube and they saddle the bottom of axle tube!! Pm me if you can help me out!!!

Hey working on a buddies 12valve and need some opinions. Is a 97 auto, with stock turbo and boost elbow, has 60lb springs and 4gsk are only mods. It sounds to me like has air in the fuel or a fuel problem of some sort. It doesn't have a miss per say because motor doesn't shake like if you...

Getting a bind on a 3-2 downshift... I doesn't seem to do it if I let off the throttle and ease back into but if I'm on the throttle in drive and pull it down to manual 2nd I get what feels like a bind.. Does this have to do with band adj. or something else. Please help!!!

Getting a bind on a 3-2 downshift... I doesn't seem to do it if I let off the throttle and ease back into but if I'm on the throttle in drive and pull it down to manual 2nd I get what feels like a bind.. Does this have to do with band adj. or something else. Please help!!!

I'm serious need of 47re throttle valve arm!! Must have forgot to tighten bolt last when I have valve dodgy out cuz went to check tv cable adjustment because trans started to stack shifts and throttle valve arm on transmission was gone. Pleas help or spread the word hoping someone has a junk...

Here is what I've done so far. 1. Adjust tv till blue in the face. It has 1/8-1/16 play at wot. Didn't help 2. Check gov pressure and had double the psi compared to mph from about 10mph on. So I changed put in bw gov pressure sensor and transducer. While I was in there adjusted tv arm...

I wanting to do some pan off upgrades for now. I'm looking at the two transgos' the sonnax sure cure or the superior shift kit. I'm also looking for the best place to buy the billet servo, accumulator, strut and anchor. Found some info on transgos but wanting to hear from somebody with...

I'm working on a 07 5.9 with a intermittent p0202 and once it throws the code it idles rough and defiantly is missing. So, what has me confused is the p0202 is a open circuit on #2 cylinder, so I pulled th valve cover and began ohming injectors. They were as follows 1 .7ohms 2. 1.2 3...