Search results

I want to thank all the homo's ( 300+ in the 5.9&6.7 section) that looked at my post about a homemade intake horn and said nothing. I had one person reply on comp d, who knew that DTR would be more helpfull. People ask questions about pulling and oil pan off while its in the truck and have...

I know my sig is a 6.7 but I need to ask some 5.9er's about an afermarket plenum. I noticed that I gained 4psi of boost and my idle egt's are about 50° lower than stock. Also at 100mph with the edge turned up my temp was 1050°, so im happy there. But I noticed that the egt's fluctuate really...

I got a bro in-law with a 05 6.0 and his turbo makes a groaning sound when the block is cold, it goes away seconds later. But, it also leaks coolant out of his exhaust pipe, im thinking its a blown egr coole. Any hints thanks Dayton

my brother in law has an 05 6.0 stock, eccept the exhaust. Today his truck died on him while drivin, when he stopped and looked around he found that his rear main seal blew. It aint throwin any codes, is there a sensor that will let it crank but not start, mabey like a low oil presure sensor, he...

read my sig, i was all in to my truck the other day and it flatlined at 3200rm's, my question is, it felt like the govenor kick in. I thought i would be able to pull passed 106,107 mph. any thoughts on wahts up, or what yall have pulled to thanks Dayton

i got a buddy with a 04 auto, he wants to know if a 6.7's auto will bolt up and work good

does anyone know about puttin 3rd geb 5.9 injectors in a 6.7 thanks Dayton

I just put on a home made intake like the Willie Whistler, when the motor is cold it kinda surges while excelorating. Its almost like its choking, then once it fully warms up it stops. I was wondering it it might be from me puttin the mass airflow sensor all the way down flush on the pipe...

just curious my truck has never been flased of updated, the only problem i have had was the turbo go out and that was at 7,000miles. I have 25,000miles on it now and im wondering if i should re-flash thank, Dayton

i just unplugged my egr and it started loaping real bad, i tried to drive it and it poured smoke and shuttered bad. All i unplugged was the one plug up top on the valve itself, any help would be awsome thanks, Dayton

I just unpluged my egr and was wondering what the pluses are on getting a block-off plate. With it un pluged will it still put soot back into the intake. thanks, Dayton Btw, My girlfriens dad has an '08 6.7L, if he unplugs it, will he always though a code or will it go off after a while...

what is the maximum hp of the edge juice w/attitude, is it 100 or 180hp over stock

with the edge in hot mode,what is the max hp of the programer, is it 100hp over stock or180hp over

How mitch hp will an 05 6.0 auto tranny hold stock

Does the edge juice with attitude over-ride the govoner. My clutch slips if I turn it passed 3, I was thinking it might do it on level 5 or 6. Thanks Dayton

To delete the egr do i just need the fooler or the fooler and the delete kit. Please educate me a little. thanks Dayton

i went and bought a needle grease zert to lube up the front drive shaft, and realized that it is a pain. Correct me if im wrong, but do you slide the neddle under the rubber seal around the bearing cap itself to insert the grease, because my didn't want to take hardly any grease. thanks Dayton

Does anyone know if the 5.9 and the 6.7 use the same shifter. The bolt on the top of the 6.7 that holds the knob down, has a shank of 3/8" and a thread pitch of 1.5. I was wondering if the 5.9 is the same

Does anyone know where i ca buy a used 6.0 for an "04 king ranch. thanks Dayton

just wondering it the the taillights off of an '05 model will fit and work on my '07. i dont have the lights to do the comparion myself. thanks, dayton