Can somebody measure the distance between the clutch pedal pivot to the slave cylinder stud for me? converting an auto to 5 speed and starting with older mechanical linkage pedals... Thanks in advance
I ended up with 2 hood stacke, 2 cover vents and one in the top of my afc housing... new motor and I think unhappy rings.... pushes 3/4 of a quart at the end of a run...
Will, The changes that were made from my 10.1x pass were a stock stall converter that I cant spool my chargers with and I went from 35* of timing to 32.5* (timing taken with a light).I pulled the timing because I couldn't spool at all with 35*. I think my 2500 stall converter may have been hurt...
Getting closer, still don't have the 9. the lightweight brakes may have given me a little more mph. The truck was hooking good with a poor 60'. It may be time to get the converter looked at.
Just looking to see what guys are running as a secondary under a s488sxe with a 96 1.32 on the exhaust side. 12 valve with a 13mm pump and 2500 stall converter. Goal around 1000 hp > wanting to stay with a s400 frame charger on the manifold. Thanks in advance
Great info thank you, so the 2 best answers were.. weight reduction and a 7.1 liter.. I have a lightweight brake kit I was saving for the 9" project but after reading your post im going to run them on my dana 80 and see what it gets me. Here are the actual weights new vs old.
dana 80 drum...
Anteater / valvebody question.
Is anybody having a problem with the commanded shift not actually hitting the mark?
I was finally able to make a few consistent passes the other night and noticed im shifting late in the rpm. (4200) my RPM in the shift schedule should be around 3300 and...
The autometer diesel tach needs 4 notches ( or pickups) equally spaced to work. my fluidampr had 2 1/2" wide 3/16 deep notches i added 2. I welded a piece of pipe to there relocation bracket and good to go. I think its bull**** for what that tach costs they don't sell any kind of install kit....
Hi guys, I'm getting ready to build a regular cab short box 4x4 for a new drag truck. Would anybody have some good roll cage pics? im torn between going through my dash or in front of it...Thanks in advance
Selling a grizzly locker from yukon gear. Had this in my 07 dodge 3500 returned it back to stock before i sold it. street driven only. 650.00 plus the ride located 12771.