12v engine parts, VP44

[79powerwagon]

I have a 1996 160hp 12v engine, minus the p7100.

I bought two of these engines from a coworker who got these from FedEx. I used one for a swap into my 2001.

Complete lower end - Bores look in decent shape no major scoring. It could be ran as is but I would probably refresh it. Front sump oil pan. Has the adapter/starter for a Allison 545.

I could sell the front cover/cam/gears etc for a ppump swap if desired.

The head is originally from the engine I used which had lower miles. One ex manifold bolt snapped and injectors are stuck in there.

I'd prefer not to piece out this stuff.

Have the VP44 from my 2001. It was a good runner, I was just ready to go to mechanical Injection. I do not know the miles but it had a Fass ddrp, no tuning.
Would get you by if anything.

Also have a Bosch A type pump. It is a reman and hasn't been run.

Make offer on parts. Located in MN

6122213398

Sam

 

[matt05]

Where at in MN? I'm down by i90 and interested in the 12v.

 

[79powerwagon]

Pm sent

 

[79powerwagon]

Head sold

VP44 sold

Have a smarty so3 that I bought to change tire size programming also. Make offer

 

[79powerwagon]

Smarty sold


I have the original 24v engine out of my 2001 also.

300k when pulled, ran perfect with no issues.

I was going to keep it but could use the $ right now.

1 owner truck before me and very well maintained, out of western Colorado so it's a rust free block. It is a 53 and is not cracked and probably never will at this point.

$1000?

Still have the 95 12v block/rotating assembly/front cover/gears $750

 

[79powerwagon]

I also have two rear dump 12v exhaust manifolds $50 each

Reman Bosch A pump for 5.9 make offer!