12v fuel system question

[DieselWrencher]

I was wondering if anyone had any good way to bypass the stock filter head on these 12v dodges when you start building a fuel system. I am mainly looking at the return line area. Any help is greatly appreciated.

 

[Bobcat698]

I just threw the filter assembly into the corner of the shop, put the mech lift pump on the tow rig, & put a block off plate over the hole where the mechanical lift pump used to be.

I ran -6 into the pump, a banjo off the return side with -6 into an Aeromotive regulator, then returned the fuel to the stock return line. We tapped the injector return line further down into the stock return line.