12v problems

[TacticalRedneck]

Ok posting from my phone excuse the mistakes. Got home today found oil dripping opened the hood and found oil had shot out from the overflow on my coolant and the bottle was full of oil. I had hardly no oil on the dipstick. I'm guessing its a headgasket. I used to could take off my oil cap and see steam come out guess that's blow by, even had to replace a dipstick. Would that causr my gasket to go? Will. A new gasket be enough to fix it for now? To fix the blow by would new rings alone help?
its. 1995 12 valve 5 spd

 

[Tate]

Could also be a failed oil cooler.

 

[TacticalRedneck]

I did replace some bolts on the motor a while back I lost a lot of oil through that, then I replaced the dipstick because oil was coming out the tube. Sounds like there could be pressure in there but I just don't know what's wrong...

 

[Rick James]

Was oil being blown out of the dipstick with the engine running or just flowing out with engine off?

 

[TacticalRedneck]

It wasn't coming out at idle, just after I gad drove it a while

 

[BigPapa]

I did replace some bolts on the motor a while back I lost a lot of oil through that

What bolts did you replace? Please detail.

 

[ChuMaDD]

Could also be a failed oil cooler.

I would look here 1st