Younger1993
New member
After a long time of searching, I went with a 4088R for my 6.0 and 210cc injectors. (will be pairing with an 80mm for compounds)
I haven't dealt with a ball bearing before, and I am not sure on plumbing.
I plan on using a -10AN drain, but as for the feed...I believe I am going to use
-4AN...
As for the restrictor..there is one in the feed on the turbo already, do I need to add another restrictor in the line?
I haven't dealt with a ball bearing before, and I am not sure on plumbing.
I plan on using a -10AN drain, but as for the feed...I believe I am going to use
-4AN...
As for the restrictor..there is one in the feed on the turbo already, do I need to add another restrictor in the line?