64/480 compounds 6.7 feedback

slor1de

slor1de

Member
Joined
Feb 17, 2007
Messages
907
Looking for some feedback. Anyone running 364/480 setup on a stock fuel 6.7. Tow rig/daily driver. Hoping for a clean 600hp or so. Anyone have any input, hows it drive. Could swap out the 80 for a 75 also.
 
if your absolutely staying stock fuel, do a 475, otherwise s480. s300/s400 compounds on 6.7's are huge goth tiddies
 
I have the 64/480 setup, but the 80 needs freshened up, could go to a 75. I have 20% over nozzles on the shelf from another project that could possibly be used down the road but that would be it for fuel upgrades. Would like to be as smoke free as possible.
 
I would think for the hp goal a 62mm would be better. What turbine and housing are you running on the 80?
 
64/71/14 over 80/96/1.32
That is what I currently have. Secondary is staying as it is as it’s on its way back to me from getting freshened. The 80 needs sent out to be freshend yet and would consider going 75 on it. More less looking to hear from anyone running this setup as for how it drives.
 
I would keep the 80 and change the turbine to a 92mm. It looks like there is a 1.25 T6 housing or you can run the traditional 1.10 T6.
 
You have the parts, run what you have. If you want more resopnse from the primary, get a 1.15 housing. If thats not enough get a 75 and put the 1.15 housing on it.
 
You must log in or register to reply here.
Back
Top