Actual 87/81 "J-type" turbine wheel specs?

DPC

New member
Joined
Sep 10, 2009
Messages
218
What are the actual specs of the 87/81 "J-type" Borg Warner turbine wheel? The info I found shows a measurement of 87.37/81.74mm.

I recently purchased a new S475 and specifically asked for the 87/81 "J-type" Borg Warner turbine wheel. The measurements on my wheel are 87.30/80.38mm. What wheel do I have??? Thanks for your time.
 
The info you found is correct, the j-type is better referred to as the 87/82. I'm not sure what you have but a couple pictures would help.
 
de5caef24d1cc4ed112f4ddec25efdc9.jpg
4651b5b15ebd362268d6ee4f87248455.jpg
57790e8e3678b1014799c8f500ee47aa.jpg




Sent from my iPhone using Tapatalk
 
That is the new style wheel, the JD 80/87mm wheel has a cast clip.
 
I remeasured, closer to 87.38/80.36. Small end still seems to be off?
5ea326a5eb7eb25617aaad20928a250d.jpg
339b613ae3fdddf091bb3a792e01d030.jpg



Sent from my iPhone using Tapatalk
 
The JD 80/87mm and J-type 81/87mm are quite different, and you clearly have the latter.

80/87mm
262241_230611103626307_5892459_n.jpg


81/87mm
271060_230611140292970_6772145_n.jpg
 
Thanks for the pics, that helped clear things up.
 
I tried ordering just the turbine wheel and no one would sell it separate. Don't know if that has changed.
 
Side by side comparison with my 87/81 and the pic Smokem posted.
 

Attachments

  • 271060_230611140292970_6772145_n.jpg
    271060_230611140292970_6772145_n.jpg
    51 KB · Views: 0
  • 4651b5b15ebd362268d6ee4f87248455.jpg
    4651b5b15ebd362268d6ee4f87248455.jpg
    29.6 KB · Views: 0
Try this one.
 

Attachments

  • Picture1.jpg
    Picture1.jpg
    39.4 KB · Views: 0
Not the 87/81 j type wheel! I had my s480, PN179180, off the truck to switch turbine housings. The housing from my new s475 would would not fit my s480. Measured my s480, 87.37/81.54. Took some pics, they are not the same wheel!
daf6c949b05ace629d77e085062dc8dd.jpg
83456174d20917f1af7d723b5d74f3ee.jpg
071e68366b30ac31082f94a85de134f5.jpg
9f60178210866dd649f4c20406ee0847.jpg



Sent from my iPhone using Tapatalk
 
It is the same wheel, however it looks as though the inducer has been machined to a smaller diameter.
 
I will have to send this back, my exhaust housings are not interchangeable.
 
Could be, I sent the turbo back and waiting for the refund...


Sent from my iPhone using Tapatalk
 
Back
Top