jambbii
milk
- Joined
- Aug 10, 2006
- Messages
- 456
I just noticed some seeping from the very corner of the driver's side front corner of my cylinder head. I can get it to leak after I beat on it. It doesn't even leak enough to make it down 8 inches from the gasket. It does not pressurize the coolant system. Driving normally or even leaning into it pretty hard will not make it leak.
My question is could this possibly be too much coolant pressure? I know I should be doing a coolant bypass but haven't got to it. I had the head off when I had a turbo explode 30k ago and everything was resurfaced.
Combo is 363/71 t4, 60% overs, arp425s. Truck only makes 50lbs of boost. The only thing I am lacking is drive pressure #s.
Thanks
My question is could this possibly be too much coolant pressure? I know I should be doing a coolant bypass but haven't got to it. I had the head off when I had a turbo explode 30k ago and everything was resurfaced.
Combo is 363/71 t4, 60% overs, arp425s. Truck only makes 50lbs of boost. The only thing I am lacking is drive pressure #s.
Thanks