joefarmer MR. Supreme Overlord Joined Jul 31, 2006 Messages 6,137 Aug 29, 2014 #1 Is there any reason to run the oil pressure sensor in a EFILive 2006 standalone application? The customer is running a mechanical gauge but didn't know if the ECM would derate fuel without oil pressure? I figured I'd ask.
Is there any reason to run the oil pressure sensor in a EFILive 2006 standalone application? The customer is running a mechanical gauge but didn't know if the ECM would derate fuel without oil pressure? I figured I'd ask.
turboram spinny shiny things Joined Aug 18, 2012 Messages 646 Aug 29, 2014 #2 My puller doesn't have one ,and I've had them go bad before and no defuel so no you don't need it
joefarmer MR. Supreme Overlord Joined Jul 31, 2006 Messages 6,137 Aug 30, 2014 #3 Cool. We'll try it.
turboram spinny shiny things Joined Aug 18, 2012 Messages 646 Aug 30, 2014 #4 You will need to disable the code and there is a check gauges light on in the factory trim, standalone no worries
You will need to disable the code and there is a check gauges light on in the factory trim, standalone no worries