Injector Nozzel Compatibility

[Cummins610]

So...I bought some nozzles for a 04.5-07 CR and today I went to swap them to my current nozzles in my 05. The 'factory' nozzles I have seem to be a different design than the aftermarket ones. Plus I was not expecting the puck/sping/spacer to be in my current bodies(I thought this was only a 6.7L setup?). My new nozzles are "1659's" and my old ones are 1309 / 448109 Brazil. Here are the pictures. Let me know what you think...... Don't mind my dirty mits.

"Old Nozzles"

"New Nozzles"

Puck/Spring

 

[dangerous06]

Give Todd a call at T&C diesel.

 

[BrettWINspeed]

The old style nozzle will only work on the old style body.

Puck/Spring

I don't see the puck in your picture, the puck that they talk about sits inside of the collar at the bottom of your picture. You can download 6.7 nozzle install instructions from DDP's website, they have a picture of the puck and where it is located.

 

[D45]

1659s and 1309s were used on 04.5-07 injector bodies, they are the same 5 hole nozzle