farmboypowerstr
New member
- Joined
- Jun 5, 2008
- Messages
- 53
Anyone know how to turn the injector pump up on a 4440 tractor?
inside you will find a small flat head machine screw with a 10mm head lock nut
edit: to correct my word usage...it looks like a piece of all-thread with a slot in the end (for adjustment with a straight screw driver)...sorry for the confusion...didn't want ya pulling the cover off just to start calling me names...:hehe:
another disclaimer...some of the back covers are attached with torx head screws, while still some others are attached with some funky arse anti-tamper screws...but the 4440 uses an old enough pump you ought to be good with a 10mm wrench and straight screw driver :Cheer:
Well it takes fuel to make power... But if you are only using the extra power to help you through tough spots and not constantly keeping the tractor on it's knees you shouldn't see much difference.worse fuel econ. better? same?
wow great info, thanks alot all of ya. Is there any bad things that will happen because of this?
its a powershift.