jeffrey.blevins
New member
- Joined
- Nov 2, 2014
- Messages
- 7
Who is having good luck running m&h cheater slicks.
I am
I ran them last two seasons with no problems
I ran tubes and bead screws.
M&H was pretty insistent on running tubes. I have switched this season to the 12/16 slick and will be trying them tubeless.
have you looked at the weight on the 12/16?
I have and decided against them for that reason.
Are you doing the dawn dish soap trick for running tubeless?
Not sure if talking weight rating but no I have not found any such rating for them. However I am 2wd and have ran them on two quad cab full weight 2wd trucks with out issue for them though those had tubes.
I have never really had an issue that I felt I needed to try the dish soap. I ran my 33.5/17/16 on the PS truck tubeless as well. The new M&H's I mounted 3 weeks ago and checked them today both were within less than a 1/4 psi of each other. They were 3 lbs less than the day I mounted and filled them however it is also 20* cooler today as well.
I'm talking about the weight of the tire itself. It seems like i remember them being quite a bit heavier.
Thanks for the feedback on running tubeless.
I just got my nostalgia 12/16 slicks and weighed everything while mounting. The slick weighs 33lbs, the tube is 5lbs. I'm wondering if I need to screw them , and if so do you have to do both sides.
I run them, wish they made them taller.32
have you looked at the weight on the 12/16?
I have and decided against them for that reason.
Are you doing the dawn dish soap trick for running tubeless?
have you looked at the weight on the 12/16?
I have and decided against them for that reason.
Are you doing the dawn dish soap trick for running tubeless?
Did you get a weight on the 14/16/30?
Can you elaborate on the dawn dish soap trick? Does this keep the tires from spinning in the rim?