Mishimoto radiator with flex a lite aluminum fan shroud

[tater_thrower76]

As the title says, wondering if you can use both together or better off just getting Mishimoto radiator and use their fans, I just don't like the look or the way that style fan mounts
Any help is appreciated

 

[tater_thrower76]

Nobody has tried the two together?

 

[STROKETHISF350]

I did but it was in a superduty


Sent from my iPhone using Tapatalk

 

[tater_thrower76]

Everything mount up okay? Similar idea I guess

 

[floridabob]

Did the Mishomoto and silicon hoses on my 96 CTD and it was very simple. Use their bolts, my only caution.

Does seem to run a bit cooler now.

Bob

 

[tater_thrower76]

^^^ are you running factory fan and shroud then?

 

[STROKETHISF350]

Everything mounted fine the fans mounted to the radiator where the shroud would normally bolt


Sent from my iPhone using Tapatalk

 

[floridabob]

I am running factory cooling, mostly.

Garrett twins, water cooled. Stainless tstat.

Fan/shroud factory. Basically, but not original.

 

[tater_thrower76]

Mine showed today, they look as if they'll bolt right up To each other!

 

[tater_thrower76]

For anyone that cares
They do bolt right together with no issues besides top radiator how's clamp doesn't have much room with the fan shroud so close to it

 

[moparcars1]

Thank for the info. I'm doing the same thing