RonA
Active member
- Joined
- Feb 26, 2008
- Messages
- 11,068
I had to use the spare cam I bought for the 1kgen1 project. Figured I'd order one now in case it takes a while to get a blank. It will reside in my p-pumped 6.7. Needs to be able to handle up to 3800rpm max. Currently using 181/210 and something similar would be fine. Going in a daily driver. Must have bolt on gear and be a new blank. Block will be bored for cam bearings. Let me know what you offer.
Thanks.
Thanks.